Nanotechnology Community
Nanotechnology Community
Massaro

Alessandro Massaro

R&D Chief of Dyrecta Lab srl
Research & Development
DyrectaLab s.r.l.

Biography

Alessandro Massaro. Professor Alessandro Massaro (ING/INF/01, FIS/01, FIS/03) carried out scientific research at the Polytechnic University of Marche, at CNR, and at Italian Institute of Technology (IIT) as Team Leader by activating laboratories for nanocomposite sensors for industrial robotics. He is in MIUR register as scientific expert in competitive Industrial Research and social development, and he is currently head of the Research and Development section and scientific director of MIUR Research Institute Dyrecta Lab Srl. Member of the International Scientific Committee of Measurers IMEKO and IEEE Senior member, recently received an award from the National Council of Engineers as Best Engineer of Italy 2018 (Top Young Engineer 2018).

Research Interests

• AWARDS

2009 – 2014 Bonus of scientific productivity (IIT-CBN)

Best Engineer in Italy 2018: award of “Top Young Engineer 2018” promoted by Consiglio Nazionale degli Ingegneri and by Federmanager (18 January 2019, Palazzo Strozzi –Firenze -).

Idoneous for the National Research Council (CNR) researcher position (third level) for the following positions:
1- CNR n. 364.92: Physics Science: "photonics, coherent light manipulation, applications in spectroscopy and optical communication";
2- CNR n. 374.97: Physics Science: " Photonics in silicon devices and sensors in the biomedical field and optical interconnections "
3- Associate Professor in Experimental Physics
4- Associate Professor in Electronic

• CHAIR ACTIVITY/CONFERENCE ORGANIZER/CO-CHAIR/COMMITTEE

[CH1] Chair in SPIE Europe conference 8-10 April 2008- Strasbourg, France.
[CH2] Chair and organizer of the special session: “Nanotechnology and Biosensing” IEEE Sensor 2011, Limerik, Ireland, 2011.
[CH3] Chair and organizer of the special session: “Ultrasound Molecular Imaging and Nanosystems” IEEE Sensor 2011, Limerik, Ireland, 2011.
[CH4] Chair and organizer of the special session: “Sensors and Transducers for Nanotechnology,” IEEE 9th International Multi-Conference on Systems, Signals & Devices, Chemnitz, Germany, 2012.
[CH5] International Program Committee and Technical Program Co-Chairs of 4th Imeko TC19 Symposium on Environmental Instrumentation and Measurements “Protecting Environment, Climate Changes and Pollution Control” June 3-4, 2013, Lecce, Italy.
[CH6] International Program Committee of 3rd Imeko TC13 Symposium on Measurements in Biology and Medicine “New Frontiers in Biomedical Measurements”, April 17-18, 2014, Lecce, Italy.
[CH7] International Program Committee of Imeko TC19 Symposium on Environmental Instrumentation and Measurements, 5th IMEKO TC19 Symposium September 23-24, 2014 Chemnitz.
[CH8] International Program Committee of 1th Workshop on Nanotechnology in Instrumentation and Measurement NANOfIM2015, July 24-25 2015, Lecce, Italy.
[CH9] Chair and organizer of the special session: “Technology of Nanostructured Carbon Based Materials and Sensing” 1th Workshop on Nanotechnology in Instrumentation and Measurement NANOfIM2015, July 24-25 2015, Lecce, Italy.
[CH10] International Program Committee of 2th Workshop on Nanotechnology in Instrumentation and Measurement NANOfIM2016, September 8-9 2016, Chemnitz, Germany.
[CH10_b] International Program Committee of 1st IMEKO TC19 International Workshop on Metrology for the Sea, Naples, Italy, 11-13 October, 2017.
[CH11] Steering Committee of NANOfIM 2017 (http://nanofim.gbu.co.in/organizing-committee/ )
[CH12] International Program Committee of NANOfim 2018 conference (https://nanofim2018.up.edu.mx/organization/ ).
[CH13] Chair and organizer of the special session: “Electronic and Mechatronics in Industry” IEEE Metrology for Industry 4.0 & IoT, Rome, Italy, June 3-5, 2020 (http://www.metroind40iot.org/special-session-3 ).

Membership/Past Membership of International Society
-[M1] EUMA- European Microwave Association;
-[M2] IEEE (Senior Member # 92257194);
-[M3] American Nano Society: http://members.nanosociety.us/Massaro ;
-[M4] Imeko (International Measurement Confederation) TC 19.
-[M5] AEIT Associazione Italiana di Elettrotecnica, Elettronica, Automazione, Informatica e Telecomunicazioni.

Publications

INTERNATIONAL JOURNALS
J1) A. Massaro, L. Pierantoni and T. Rozzi, “Accurate Analysis of Wave Propagation in Negative Uniaxial Crystal”, IEEE Journal of Quantum Electronics, vol.40, no.6, June 2004, pp. 821-829.
J2) A. Massaro, F. Cavallari and T. Rozzi, “Polarization Switching by TM Passing of Laminated Cover”, IEEE Journal of Lightwave Technology, vol.22, no.2, February 2004, pp. 558-566.
J3) A. Massaro, L. Pierantoni and T. Rozzi, “Accurate Analysis and Modeling of Laminated 3D Optical Waveguide”, IEEE Journal of Quantum Electronics, vol. 40, no.10, October 2004, pp.1478-1489.
J4) L. Pierantoni, A. Massaro and T. Rozzi, “Analysis of an Optical Polarizer based on Laminated Cover Waveguide”: IEEE Journal of Lightwave Technology, vol. 24, no.3, March 2006, pp.1414-1424.
J5) L. Pierantoni, A. Massaro and T. Rozzi, “Accurate Modeling of TE/TM Propagation and Losses of Integrated Optical Polarizer”, IEEE Transactions on Microwave Theory and Techniques, vol.53, no. 6, June 2005, pp. 1856-1861.
J6) A. Massaro L. Pierantoni, T. Rozzi, “Development of the EM Coupling in Laminated Multilayered 3D Optical Waveguides”, IJN International Journal of Numerical Modelling, June 2005, vol. 18, pp. 237-253.
J7) A. Massaro, L.Pierantoni, and T.Rozzi, “Far-Field Radiation of Optical Fibers with Tapered End”, IEEE Journal of Lightwave Technology, vol. 24, no.8, August 2006, pp. 3162-3168.
J8) L.Pierantoni, A. Massaro, and T.Rozzi, “Efficient Modeling of 3D-Photonic Crystal for Integrated Optical Devices", IEEE Photonics Technology Letters,vol.18, no.2, January 2006, pp.319-321.
J9) A. Massaro, L.Pierantoni, and T.Rozzi, “Q-Factor Evaluation Design and Accurate EM Performance of Multilayer Dielectric Filters”: IJN International Journal of Numerical Modelling, 2006, vol.19, pp. 521-537.
J10) A. Massaro, and T.Rozzi, “Rigorous Time-domain Analysis of Dielectric Optical Waveguides using Hertzian Potentials Formulation”, OSA Optics Express, March 2006, vol.14, no.15, pp.2027-2036.
J11) A. Massaro, L.Pierantoni, and T.Rozzi, “Resonances of 2D-MESA Periodic Structures in Integrated Optics by Unit Cell Structure Design”, Microwave and Optical Technology Letter, April 2006, vol.48, no. 4, pp. 629-632.
J12) A. Massaro, L.Pierantoni, and T. Rozzi, “Experimental and Numerical Investigation of Polarization Properties in Photonic Crystal fibers”, SPIE Optical Engineering, November 2006, vol.45 ,no. 11, pp.115007-1,115007-5.
J13) A. Massaro, L.Pierantoni, and T.Rozzi, “Modal and Numerical Analysis of the Transverse Magnetic-Passing Property of Laminated Cladding”, IEE Optoelectronics, vol.1, no. 4, Aug.2007, pp. 150-156.
J14) A. Massaro, M. Grande, R. Cingolani, A. Passaseo, and M. De Vittorio, “Design and Modeling of Tapered Waveguide for Photonic Slab Coupling by Using Time-Domain Hertzian Potentials Formulation”, OSA Optics Express, December 2007, vol. 15, no.25, pp. 16484-16499.
J15) A. Massaro, V. Errico, T. Stomeo, A. Salhi, R. Cingolani, A. Passaseo, and M. De Vittorio, “3-D FEM Modeling and Fabrication of Circular Photonic Crystal Microcavity,” IEEE Journal of Lightwave Technology, August 2008, vol.26, no. 16, pp. 2960-2968.
J16) A. Massaro, V. Errico, R. Cingolani, M. De Vittorio, and A. Passaseo, “Negative Uniaxial Crystal Behavior Of Circular Photonic Crystal,” IEEE Journal of Quantum Electronics, December 2008, vol.44, no. 12, pp. 1225-1231.
J17) A. Massaro, V. Tasco, M. T. Todaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Scalar Time Domain Modeling and Coupling of Second Harmonic Generation Process in GaAs Discontinuous Optical Waveguides, ” OSA Optics Express, September 2008, vol.16, no. 19, pp.14496-14510.
J18) A. Massaro, R. Cingolani, A. Passaseo, and M. De Vittorio, "Circuit Modeling of Discontinuous Planar Waveguides at High Frequencies," Journal of Computational and Theoretical Nanoscience, vol 6, no.1, January 2009, pp. 172-177.
J19) A. Massaro, R. Cingolani, A. Passaseo, and M. De Vittorio, “Near Field and Optical Diffraction of 3D Dielectric Corner by Transmission Line Modeling and Multipole Expansion of Green’s Function,” Journal of Computational and Theoretical Nanoscience, vol. 6, no. 5,May 2009, pp. 1075-1080.
J20) A. Massaro, R. Cingolani, A. Passaseo, and M. De Vittorio, “Transverse Resonance Circuit Modeling and Hertzian Potential Formulation for Integrated optical Waveguides,” Journal of Computational and Theoretical Nanoscience, vol. 6, no. 7, July 2009, pp. 1452-1457.
J21) A. Massaro, V. Tasco, M. T. Todaro, M. De Vittorio, and A. Passaseo, “Novel Time-Domain Circuit Modelling of chi(2) Nonlinear process in Periodic Optical Waveguide,” Journal Ferroelectrics (Taylor and Francis), 2009, vol. 390, Issue 1, pp. 62-70.
J22) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Double Grating Design and Modeling of Second Harmonic Enhancement by Radiation Coupling in Nonlinear Optical Waveguides,” Journal of Computational and Theoretical Nanoscience, vol. 6, no. 10, October 2009, pp. 2170-2178.
J23) A. Massaro, L. Pierantoni, R. Cingolani, and T. Rozzi, “A New Analytical Model of Diffraction by 3D-Dielectric Corners,” IEEE Transaction on Antennas and Propagation, vol. 57, no. 8, August 2009, pp. 2323-2330.
J24) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Novel Grating Design Approach by Radiation Modes Coupling in Nonlinear Optical Waveguides,” OSA Optics Express, vol. 17, issue 9, April 2009, pp. 6982- 6995.
J25) A. Massaro, V. Tasco, M. T. Todaro, T. Stomeo, R. Cingolani, M. De Vittorio, and A. Passaseo, “FEM design and modeling of chi(2) second harmonic enhancement in circular photonic crystal,” IEEE Journal of Lightwave Technology, vol. 27, no. 19, pp. 4262-4268, October 2009.
J26) A. Massaro, R. Cingolani, A. Passaseo, and M. De Vittorio, “Floquet’s Unit Cell Design for High Frequency Periodic Structures,” International Journal of Microwave Science and Technology, Vol. 2009 (2009), Article ID 160321, pp.1-10.
J27) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Bragg Reflector By Means of the Form Birefringence Effect in Dielectric Rings,” Superlattices and Microstructures, issue 47, 2010, pp. 219-224.
J28) A. Massaro, V. Tasco, M. T. Todaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Design of Nonlinear GaAs/AlGaAs Second Harmonic Converters,” Superlattices and Microstructures, issue 47, 2010, pp. 108-117.
J29) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Artificial Anisotropy in Circular Photonic Crystals and Applications,” IEEE Transaction on Nanotechnology, vol. 9, no.2, 2010, pp. 157-159.
J30) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Design and Optimisation of WDM Circular Photonic Crystals Characterised by Induced Anisotropy,” Journal of Computational and Theoretical Nanoscience, vol. 7, no. 9, September 2010, pp. 1848-1854.
J31) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou, “Tuning Concept and Design Criteria of Efficient Planar Metallic Plasmon Waveguides using Nanocomposite Materials for Electromagnetic Radiation Applications,” Journal of Computational and Theoretical Nanoscience, Vol. 8, 1480-1488, 2011.
J32) A. Massaro, D. Caratelli, R. Cingolani, A. Yarovoy, “Analytical Approaches for Nano-Plasmonic and Micro-Millimetric Antennas,” IET Microwaves, Antennas & Propagation, vol. 5, issue 3, pp. 349-356, 2011.
J33) A. Massaro, and R. Cingolani, “STRD and Near Field Modeling of Metallic Wedges for Optical Detection Systems,” IEEE Journal of Lightwave Technology, vol. 28, no. 24, 2010, pp. 3562-3568.
J34) D. Caratelli, A. Massaro, R. Cingolani, and A. Yarovoy, “Accurate Time-Domain Modeling of Reconfigurable Antenna Sensors for Melanoma Skin Cancer Detection,” IEEE Journal of Sensors, DOI 10.1109/JSEN.2011.2117417, 2011, vol. 12, no. 3, 2012, pp. 635-643.
J35) A. Massaro, S. De Guido, I. Ingrosso, R. Cingolani, M. De Vittorio, M. Cori, A. Bertacchini, L. Larcher, A. Passaseo, “Free Standing Piezoelectric Rings for High Efficiency Energy Harvesting at Low Frequency”, Applied Physics Letters, 98, 053502, 2011.
J36) A. Massaro, F. Spano, A. L. Ekuakille, P. Cazzato, R. Cingolani, and A. Athanassiou, “Design and Characterization of Nanocomposite Pressure Sensor Implemented in Tactile Robotic System,” IEEE Transactions on Instrumentation & Measurement, vol. 60, no. 8, August 2011, pp. 2967-2975.
J37) A. Massaro, F. Spano, P. Cazzato, R. Cingolani, and A. Athanassiou, “Innovative Optical Tactile Sensor for Robotic System by Gold Nanocomposite Material,” Progress In Electromagnetics Research (PIERM) Journal, vol. 16, pp. 145-158, 2011.
J38) A. Massaro, F. Spano, P. Cazzato, R. Cingolani, and A. Athanassiou, “Real time optical pressure sensing for tactile detection using gold nanocomposite material,” Journal of Microelectronic Engineering, vol. 88, issue 8, pp. 2767-2770, 2011.
J39) F. Spano, A. Massaro, R. Cingolani, and A. Athanassiou, “Optical enhancement by means of gold particles and polymer concentration tuning in nanocomposite materials,” Journal of Microelectronic Engineering, vol. 88, issue 8, pp. 2763-2766, 2011.
J40) A. Massaro, F. Spano, P. Cazzato, C. La Tegola, R. Cingolani, and A. Athanassiou, “Robot Tactile Sensing: Gold Nanocomposites As Highly Sensitive Real-Time Optical Pressure Sensors,” IEEE -RAS- Robotics and Automation Magazine, DOI: 10.1109/MRA.2012.2184198, vol.20, issue 2, pp. 82-90, 2013.
J41) A. Massaro, F. Spano, D. Caratelli, A. Yarovoy, R. Cingolani, and A. Athanassiou "New Approaches of Nanocomposite Materials for Electromagnetic Sensors and Robotics", International Journal on Measurement Technologies and Instrumentation Engineering, vol.1, issue 1, pp. 55-72, 2011.
J42) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou, “Experimental Optical Characterization and Polymeric Layouts of Gold PDMS Nanocomposite Sensor for Liquid Detection,” IEEE Journal of Sensors, vol. 11, no. 9, pp. 1780-1786, Sept. 2011.
J43) A. Massaro, and R. Cingolani, “Parametric Analysis, Modelling and Design of Piezoelectric AlN Cantilevers for Vibrating Energy Harvesting,” Journal of Computational and Theoretical Nanoscience, vol. 8, no.11, pp.2266-2270, November 2011.
J44) A. Massaro, R. Cingolani, “General Aspects of Hertzian Potentials Modeling in Integrated Optics,” Wiley, International Journal of Numerical Modeling, vol. 25, issue 2, pp. 115-129, 2012.
J45) D. Tartarini, and A. Massaro, “GPU Approach for Hertzian Potential Formulation Tool Oriented on Electromagnetic Nanodevices,” Progress In Electromagnetics Research (PIERM) Journal, vol. 17, pp. 135-150, 2011.
J46) F. Spano, A. Castellano, A. Massaro, D. Fragouli, R. Cingolani, and A. Athanassiou, “Wettability control by laser texturing process generating localized gold nanoparticles on polymeric thin films,” Journal of Nanoscience and Nanotechnology, vol. 12, no. 6, pp. 4820-4824, 2012.
J47) A. Massaro, F. Spano, P. Cazzato, R. Cingolani, and A. Athanassiou, “Improvements of Tactile Sensors for Robotic System by Gold Nanocomposite Material,” Journal of Nanoscience and Nanotechnology, vol. 12, no. 6, pp. 4878- 4882, 2012.
J48) A. Massaro, R. Cingolani, “MEG Modeling and Measurements of Optical Antenna Sensors as Micro Rectangular Apertures,” IEEE Lightwave of Technology, vol. 29, no. 12, June 15, 2011, pp. 1835-1841.
J49) A. Massaro, G. Venanzoni, M. Farina, A. Morini, T. Rozzi, and R. Cingolani “Experimental Pressure Sensing and Technology of Piezoelectric Microwave/RF MEMS Filters,” International Journal of Microwave and Wireless Technologies, vol. 3, no. 5, pp. 587-593, 2011.
J50) D. Ramaccia, F. Bilotti, A. Toscano, and A. Massaro, “Efficient and Wideband Horn Nano-Antenna”, Optic Letters, vol. 36, no. 10, pp. 1743-1745, 2011.
J51) A. Massaro, R. Cingolani, and A. Passaseo, “3D FEM Modelling and Technology of Piezoelectric Ring MEMS Antenna,” Progress In Electromagnetics Research C, Vol. 23, pp. 123- 135, 2011.
J52) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou, “Pillar Type PDMS Nanocomposite Optical Sensors for Liquid Detection Systems” Journal of Materials Science and Engineering B, vol. 1, pp. 819-827, 2011.
J53) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou, “Innovative Optical Nanocomposite Sensor for Security Systems,” (invited) Journal of Engineering and Technology, vol. 1, no. 2, pp. 30-33, 2011.
J54) A. Massaro, P. Massaro, “An observation on least action principle in classical mechanics oriented on the evaluation of relativistic error concerning the measurements of light propagating in a liquid” International Journal on Measurement Technologies and Instrumentation Engineering, vol. 1, no. 3, pp. 14-24, 2011.
J55) D. Caratelli, A. Yarovoy, A. Massaro, and A. L. Ekuakille, “Design and Full-Wave Analysis of Piezoelectric Micro-Needle Antenna Sensors for Enhanced Near-Field Detection of Skin Cancer,” Progress in Electromagnetism PIERS, Vol. 125, 391-413, 2012.
J56) A. Massaro, “Light Coupling and Directional Emission of Spherical Gold Nanoparticles as Nanosensors,” Optical and Quantum Electronics (Springer), vol. 44, pp. 227-233, 2012.
J57) A. Massaro, F. Spano, A. Athanassiou, “Modeling and Innovative Technology of Optical 3D Antenna Sensors as Micro-Rectangular Apertures,” Optical and Quantum Electronics (Springer), vol. 44, pp. 213-218, 2012.
J58) F. Spano, A. Massaro, L. Blasi, M. Malerba, R. Cingolani and A. Athanassiou,” In Situ Formation and Size Control of Gold Nanoparticles into Chitosan for Nanocomposite Surfaces with Tailored Wettability,” Langmuir, 28 (8), pp. 3911-3917, 2012.
J59) L. Chiodo, A. Massaro, R. Cingolani, A, Romero, A. Rubio, “Characterization of TiO2 Atomic Crystals for Nanocomposite Materials Oriented to Optoelectronics,” Optical and Quantum Electronics (Springer), DOI 10.1007/s11082-012-9559-y, Vol. 44, Issue 3-5, p. 291, June 2012.

J60) A. Massaro, A. L. Ekuakille, D. Caratelli, I. Palamara, F. C. Morabito “Optical Performance Evaluation of Oil Spill Detection Methods: Thickness and Extent,” IEEE Transactions on Instrumentation & Measurement, 10.1109/TIM.2012.2210336, vol. 61, issue 12, pp. 3332-3339, 2012.
J61) A. Massaro, and F. Spano, "Review about Innovative Micro/Nano Bio-Sensors and Nanocomposite Chips," International Journal of Micro and Nano Sensing, vol. 1, issue 1, pp. 1-9, 2012.

J62) F. Spano, and A. Massaro, "Electrospun Dextran-based Nanofibers for Biosensing and Biomedical Applications," International Journal of Micro and Nano Sensing, vol. 1, issue 1, pp. 23-30, 2012.

J63) A. Massaro, M. Troia, F. Spano, G. Carbone, "Friction in Totally Optical Robotic Finger Oriented on Shear Force Characterization," IEEE Journal of Sensors, vol. 13, issue 2, pp. 548-555, 2013.

J64) D. Caratelli, A. Lay-Ekuakille, P. Vergallo, A. Massaro, A. Yarovoy, “A hybrid FDTD/SEM model for physics-oriented analysis of time-domain radiation properties of antenna-based sensors,” Measurement (Elsevier), vol. 46, pp. 985–992, 2013.

J65) A. Massaro, F. Spano, M. Missori, M. A. Malvindi, P. Cazzato, R. Cingolani, and A. Athanassiou, "Flexible nanocomposites with all-optical tactile sensing capability," RSC Advances, vol.4, no.6, pp. 2820-2825, 2014.

J66) N.I. Giannoccaro, A. Massaro, L. Spedicato, A. Lay Ekuakille, "Detection Analysis of Small Notches Damages Using a New Tactile Optical Sensor," IEEE Transaction on Mechatronics, Feb. 2015, Vol. 20, no. 1, pp. 313-320.

J67) A. Massaro, N. I. Giannoccaro, L. Spedicato, A. Lay-Ekuakille; M. Missori, M. A. Malvindi, “Characterization of an Innovative Like-Eye Sensor for Feature Detection and Robot Sensing,” Measurement (Elsevier), Vol. 55, pp. 153–167, 2014.
J68) S. De Vitis, G. Matarise, F. Pardeo, R. Catalano, N. Malara, V. Trunzo, R. Tallerico, F. Gentile, P. Candeloro, M. L. Coluccio, A. Massaro, E. Carbone, J. P. Kutter, G. Perozziello, E. Di Fabrizio," Isolation of cancer cells by “in situ” microfluidic biofunctionalization protocols," Microelectronic Engineering, vol. 124, pp. 76–80, 2014.
J69) F. Attivissimo, C. Guarnieri Calò Carducci, A. M. L. Lanzolla, A. Massaro, M. R. Vadrucci "A Portable Optical Sensor for Sea Health Monitoring," IEEE Journal of Sensors, Vol. 15, No. 1, pp. 146-153, 2015.
J70) L. Mescia, A. Massaro, "New trends in energy harvesting from Earth long-wave infrared emission," Special Issue ''Innovative Micro and Nano Structured Materials and Devices for Energy Applications'' Advances in Materials Science and Engineering, Vol. 2014, Article ID 252879, 10 pages, http://dx.doi.org/10.1155/2014/252879, (2014).
J71) G. Cicala, A. Massaro, L. Velardi, G. S. Senesi and A. Valentini, “Self-Assembled Pillar-Like Structures in Nanodiamond Layers by Pulsed Spray Technique,” ACS Applied Materials & Interfaces, vol. 6, no. 23, pp. 21101-21109, 2014. doi: 10.1021/am505974d.
J72) A. Lay Ekuakille, G. Griffo, P. Vergallo, A. Massaro, F. Spano, and G. Gigli, "Implantable Neurorecording Sensing System: Wireless Transmission of Measurements," IEEE Journal of Sensors, vol. 15, no. 5, pp. 2603-2613, 2015.
J73) L. Mescia, A. Chiappini, A. Massaro, and Shivakiran N. B. Bhaktha, “Innovative Micro- and Nanostructured Materials and Devices for Energy Applications,” Editorial : Hindawi Publishing Corporation Advances in Materials Science and Engineering, Volume 2014, Article ID 624905, 2 pages http://dx.doi.org/10.1155/2014/624905.
J74) G. Cicala, A. Massaro, L. Velardi, G. S. Senesi; G. Perna; D. Marzulli; D. Melisi; G. De Pascali; A. Valentini; V. Capozzi, “Enhancement of surface electrical current on silicon via nanodiamond particles deposited by pulsed spray technique,” Phys. Status Solidi A, 1–7 (2015) / DOI 10.1002/pssa.201532080.
J75) G. S. Senesi, A. Massaro, “AFM Applications to the Analysis of Plasma-Treated Surface Growth and Nanocomposite Materials,” Current Nanoscience 2016, vol. 12.
J76) A. Galiano, A. Massaro, D. Barbuzzi, L. Pellicani, G. Birardi, B. Boussahel, F. De Carlo, V. Calati, G. Lofano, L. Maffei, M. Solazzo, V. Custodero, G. Frulli, E. Frulli, F. Mancini, L. D’Alessandro, F. Crudele, “Machine to Machine (M2M) Open Data System for Business Intelligence in Products Massive Distribution oriented on Big Data,” (IJCSIT) International Journal of Computer Science and Information Technologies, Vol. 7 (3) , 2016, 1332-1336.
J77) A. Galiano, A. Massaro, D. Barbuzzi, M. Legrottaglie, V. Vitti, L. Pellicani, V. Birardi, “Face Recognition System on Mobile Device based on Web Service approach,” International Journal of Computer Science and Information Technologies, Vol. 7 (4), 2016, 2130-2135.
J78) D. Barbuzzi, A. Massaro, A. Galiano, L. Pellicani, G. Pirlo, M. Saggese “Multi-Domain Intelligent System for Document Image Retrieval,” Int. J. Adaptive and Innovative Systems, 10.1504/IJAIS.2016.10011128, ISSN: 1740-2107 ISSN: 1740-2107.
J79) N. I. Giannoccaro, A. Lay-Ekuakille, L. Spedicato, A. Massaro, R. Velázquez, “An Innovative Tool for Detection of Small Notches Using a Nanocomposite Optical Sensor,” IEEE Sensors Journal, vol. 16, no. 12, pp. 5029-5036, June 2016.
J80) G. Cicala, A. Massaro, L. Velardi, G. S. Senesi, “Morphological and Electrical characterization of Pillar-like structures in Nanodiamond Layers,” IEEE Transactions on Nanotechnology, vol. 15, no. 6, pp. 890-895, November 2016.
J81) A. Galiano, A. Massaro, D. Barbuzzi, L. Pellicani and V. Birardi, “Heat Monitoring Plan in Building for Energy Efficiency using Thermal Imaging Analysis,” Journal of Next Generation Information Technology (JNIT), Vol. 7, No. 4, pp. 8-18, December 2016.
J82) A. Massaro, L. Velardi, F. Taccogna, and G. Cicala, “Experimental and numerical studies of microwave-plasma interaction in a MWPECVD reactor,” AIP Advances 6, 125001 (2016); doi: 10.1063/1.4971426.
J83) A. Massaro, A. Galiano, D. Barbuzzi, L. Pellicani, G. Birardi, D. D. Romagno, L. Frulli, “Joint Activities of Market Basket Analysis and Product Facing for Business Intelligence oriented on Global Distribution Market: examples of data mining applications,” (IJCSIT) International Journal of Computer Science and Information Technologies, Vol. 8 (2) , 2017, 178-183.
J84) D. Barbuzzi, A. Massaro, V. Vitti, A. Galiano, B. Boussahel, C. Veronica, N. Malfettone, M. Saggese, F. Forieri, F. Forieri, “Intelligent System for Image Retrieval (ISIR) based on CBIR technology: Industrialization process,” Journal of Next Generation Information Technology (JNIT), Volume8, Number2, June 2017, pp. 1-13.
J85) A. Massaro, D. Barbuzzi, A. Galiano, V. Vitti, and L. Pellicani, “Simplified and efficient face recognition system on real image set and synthesised data,” Int. J. Biometrics, Vol. 9, No. 2, pp. 143-162, 2017.
J86) A. Lay-Ekuakille, G. Griffo, A.Massaro, F.Spano, G. Gigli, “Experimental characterization of an implantable neuro-packaging for EEG signal recording and measurement” Measurement, Volume 79, February 2016, Pages 321-330.
J87) A. Massaro, A. Galiano, G. Fanelli, B. Bousshael, V. Vitti, “Web App for Dynamic Pricing Modeling in Automotive Applications and Data Mining Analytics,” (IJCSIT) International Journal of Computer Science and Information Technologies, Vol. 9 (1), 2018, 4-9 (ISSN:0975-9646).
J88) A. Massaro, A. Galiano, G. Meuli, S. F. Massari, “Overview and Application of Enabling Technologies Oriented on Energy Routing Monitoring, on Network Installation and on Predictive Maintenance,” International Journal of Artificial Intelligence and Applications, Vol. 9, no.2, pp. 1-20, 2018.
J89) A. Massaro, V. Vitti, A. Galiano, “Automatic Image Processing Engine Oriented on Quality Control of Electronic Boards,” Signal & Image Processing: An International Journal (SIPIJ) Vol.9, No.2, April 2018.
J90) A. Massaro, A. Galiano, “Design and Development of a Mobile APP for Multichannel Sales Systems based on Artificial Intelligence,” (IJCSIT) International Journal of Computer Science and Information Technologies (ISSN: 0975-9646), Vol. 9 (3) , 2018, 63-68.
J91) A. Massaro, V. Maritati, A. Galiano, V. Birardi, L. Pellicani, “ESB Platform Integrating KNIME Data Mining Tool oriented on Industry 4.0 Based on Artificial Neural Network Predictive Maintenance,” International Journal of Artificial Intelligence and Applications (IJAIA), Vol.9, No.3, May 2018, pp. 1-17.
J92) A. Massaro, V. Maritati, and A. Galiano, “Data Mining Model Performance of Sales Predictive Algorithms Based on RapiMiner Workflow,” International Journal of Computer Science & Information Technology (IJCSIT), Vol 10, No 3, June 2018, pp. 39-56.
J93) A. Massaro, V. Vitti, G. Maurantonio, and A. Galiano, “Sensitivity of a Video Surveillance System based on Motion Detection,” Signal & Image Processing: An International Journal (SIPIJ), Vol.9, No.3, June 2018, pp. 1-21.
J94) A. Massaro, V. Maritati, N. Savino, A. Galiano, D. Convertini, E. De Fonte, M. Di Muro, “A Study of a Health Resources Management Platform Integrating Neural Networks and DSS Telemedicine for Homecare Assistance,” Information, vol. 9, no. 176, 2018, pp. 1-20, doi:10.3390/info9070176.
J95) A. Massaro, V. Vitti, A. Galiano, “Model of Multiple Artificial Neural Networks oriented on Sales Prediction and Product Shelf Design,” International Journal on Soft Computing, Artificial Intelligence and Applications (IJSCAI), Vol.7, No.3, August 2018.
J96) A. Massaro, A. Calicchio, V. Maritati, A. Galiano, V. Birardi, L. Pellicani, M. Gutierrez Millan, B. Dalla Tezza, M. Bianchi, G. Vertua, A. Puggioni, “A Case Study of Innovation of an Information Communication system and Upgrade of the Knowledge Base in Industry by ESB, Artificial Intelligence, and Big Data System Integration,” International Journal of Artificial Intelligence and Applications (IJAIA), Vol.9, No.5, September 2018, pp. 27-43.
J97) A. D’Accolti, S. Maggio, A. Massaro, A. Galiano, V. Birardi, L. Pellicani, “Assessment of Data Fusion Oriented on Data Mining Approaches to Enhance Precision Agriculture Practices aimed at Increase of Durum Wheat (Triticum turgidum L. var. durum) Yield,” Journal of Food, Nutrition and Agriculture, Vol. 1, No. 1, pp. 47-54, 2018.
J98) A. Massaro, V. Maritati, and A. Galiano, “Automated Self-Learning Chatbot initially built as a FAQs Database Information Retrieval System: Multi-level and Intelligent Universal Virtual Front-Office implementing Neural Network,” Informatica Journal, Vol. 42, No. 4, pp. 515-526, 2018.
J99) A. Massaro, G. Meuli, and A. Galiano, “Intelligent electrical multi outlets controlled and activated by a data mining engine oriented to building electrical management,” International Journal on Soft Computing, Artificial Intelligence and Applications (IJSCAI), Vol. 7, No. 4, November 2018, pp. 1-20.
J100) A. Galiano, A. Massaro, A. Leogrande “The Micro-Foundation of Visual Merchandising in Italy”. International Journal of Management Cases, Vol. 21, No. 2, 2019, pp. 47-84.
J101) A. Massaro, G. Meuli, N. Savino, and A. Galiano, “A Precision Agricolture DSS Based on Sensor Threshold Management for Irrigation Field,” Signal & Image Processing: An International Journal (SIPIJ), Vol. 9, No.6, 2018, pp. 39-58.
J102) A. Massaro, P. Lisco, A. Lombardi, A. Galiano and N. Savino “A case study of research improvements in an service industry upgrading the knowledge base of the information system and the process management: data flow automation, association rules and data mining,” International Journal of Artificial Intelligence and Applications (IJAIA), Vol. 10, No. 1, pp. 25-46, 2019.
J103) A. Massaro, V. Vitti, A. Galiano, and A. Morelli “Business Intelligence Improved by Data Mining Algorithms and Big Data Systems: an Overview of Different Tools Applied in Industrial Research,” Computer Science and Information Technology, Vol. 7, No.1, pp.1-21, 2019.
J104) A. Massaro, V. Vitti, P. Lisco, A. Galiano, and N. Savino, “A Business Intelligence Platform Implemented in a Big Data System Embedding Data Mining: a Case of Study,” International Journal of Data Mining & Knowledge Management Process (IJDKP) Vol.9, No.1, January 2019, pp. 1-20.
J105) A. Massaro, A. Leogrande, P. Lisco, A. Galiano, and N. Savino, “Innovative bi approaches and methodologies implementing a multilevel analytics platform based on data mining and analytical models: a case of study in roadside assistance services,” International Journal on Soft Computing, Artificial Intelligence and Applications (IJSCAI), Vol.8, No.1, February 2019, pp. 17-36.
J106) A. Lay-Ekuakille, I. Durickovic, A. Lanzolla, R. Morello, C. De Capua, P. S. Girao, O. Postolache, A. Massaro, L. Van Basten, “Effluents, surface and subterran waters monitoring: review and advances,” Measurement, Vol. 137, pp. 566-579, 2019.
J107) A. Massaro, A., V. Maritati, D. Giannone, D. Convertini, and A. Galiano, “LSTM DSS Automatism and Dataset Optimization for Diabetes Prediction,”Applied Sciences, Vol . 9, No.17, 2019, 3532.
J108) A. Massaro, A. Galiano, A. Mustich, D. Convertini, V. Maritati, A. Colonna, N. Savino, A. Pace, L. Iaquinta, “A Case Study of Process Engineering of Operations In Working Sites Through Data Mining and Augmented Reality,” International Journal of Data Mining & Knowledge Management Process (IJDKP) Vol.9, No.5, September 2019, pp. 1-20.
J109) A. Massaro, V. Vitti, A. Mustich, and A. Galiano, “Intelligent Real-time 3D Configuration Platform for Customizing E-commerce Products,” International Journal of Computer Graphics & Animation (IJCGA) Vol.9, No.4, October 2019, pp. 13-28.
J110) A. Massaro, A. Mustich and A. Galiano, "Decision Support System for Multistore Online Sales Based on Priority Rules and Data Mining," Computer Science and Information Technology 8.1 (2020) 1 - 12. doi: 10.13189/csit.2020.080101.
NATIONAL JOURNALS
NJ1) A. Massaro et all, “Verso reti di comunicazione completamente ottiche”, Highlights CNR 2008, 2009, page 60.
NJ2) A. Galiano, A. Leogrande, and A. Massaro, “Le determinanti socio-economiche del franchising in Europa nel 2007-2016,” Economia e diritto del terziario, Franco Angeli, (ISSNe 1972-5256), 2017, Vol. 3, pp. 403-422.
NJ3) A. Galiano, A. Leogrande, S. F. Massari, and A. Massaro, “I dati non personali: la natura e il valore” Informatica e diritto, Fascicolo 2, DOI: 10.32091/RIID0010, ISSN 2704-7318, pp. 41- 61, 2019.
NJ4) A. Galiano, A. Leogrande, S. F. Massari, and A. Massaro, “I processi automatici di decisione: profili critici sui modelli di analisie impatti nella relazione con i diritti individuali,” Rivista Italiana di Informatica e Diritto, Anno 1, Fascicolo 2, 2019, pp. 1-21, DOI: 10.32091/RIID0010.
BOOK
[Bo1] A. Massaro, “Theory, Modeling, Technology and applications of Micro/Nano quantum electronic and photonic devices,” Transworld Research Network, ISBN: 978-81-7895-498-1, 2010.
[Bo2] A. Morelli, M. Galiano, A. Nico, M. Vincenti, and A. Massaro, “Innovazione Costo Zero: Come Rinnovare l’Azienda Grazie al Credito D’ Imposta per i Progetti di Ricerca e Sviluppo Risparmiando su Tasse e Costo del Lavoro”. Bruno Editore 2019.
BOOK CHAPTERS
BC1) L. Pierantoni, A. Massaro and T. Rozzi, “Modeling of Multilayered Optical Devices by TLMIE Method”, in “Recent Research Developments in Microwave Theory and Techniques”, Transworld Research Network, Recent research developments in microwave theory & techniques, vol. 2 (2004), pp. 131-154, Ch. 7, ISBN 81-7895-150-9.
BC2) A. Massaro, “Design Criteria and HPF Modeling of Nonlinear Optical Waveguides Characterized by Second Harmonic Generation Process,” Nova Science Publishers, Horizons in World Physics, Volume 272, pp. 107-122, 2012.
BC3) A. Massaro, “Photonic Crystal Waveguides and Bio-Sensors”. InTech book titled: Photonic Crystals - Introduction, Applications and Theory, 2012, chapter 6, pp. 113-132. ISBN 978-953-51-0431-5.
BC4) D. Caratelli, A. Massaro, “Electromagnetic Characterization of Electrically Small Piezoelectric Antennas and Waveguiding Devices for Detection of Cancer-Related Anomalies in Biological Tissues,” Novapublishers, Electromagnetic Fields: Principles, Engineering Applications and Biophysical Effects, Series: Physics Research and Technology, pp. 283-308, ISBN: 978-1-62417-063-8, chapter 8, 2013.
BC5) A. Massaro, “Energy Harvesting Aspects of Irregular Vibrating Forces Acting on Piezoelectric Devices”, IGI book: Innovative Materials and Systems for Energy Harvesting Applications (invited). DOI: 10.4018/978-1-4666-8254-2, ISBN13: 9781466682542, Ch. 6, 2015, pp. 143-158.
BC6) G. S. Senesi, A. Massaro, A. Galiano, and L. Pellicani, “AFM Approaches to the Study of PDMS-Au and Carbon-Based Surfaces and Interfaces,” Ashutosh Tiwari, Hirak K. Patra, and Xuemi Wang (eds.) Advanced Materials Interfaces, (127–148) © 2016 Scrivener Publishing LLC.
BC7) A. Massaro, “From Einstein Theories to Least Action Principle, a Relativistic Error of a Limit Case of Classical Mechanics: Matching With Measurements of Light Propagation,” chapter 2 pp. 22-46, IGI Global 2019, Strategic Applications of Measurement Technologies and Instrumentation; Editor: Soubantika Palchoudhury, ISBN13: 978152255406, book pages: 1-223, Web. 8 Jan. 2019. doi:10.4018/978-1-5225-5406-6.
BC8) A. Massaro, N. Contuzzi and A. Galiano, “Intelligent Processes in Automated Production Involving Industry 4.0 Technologies and Artificial Intelligence," book chapter: Advanced Robotics and Intelligent Automation in Manufacturing, IGI GLOBAL, ISSN: 2327-0411, DOI: 10.4018/978-1-7998-1382-8.ch004, ch.4, pp. 97-122, 2020.
BC9) A. Massaro and A. Galiano, “Infrared Thermography for Intelligent Robotic Systems in Research Industry Inspections: Thermography in Industry Processes,” IGI Global 2020, Handbook of Research on Advanced Mechatronic Systems and Intelligent Robotics, Ch. 5, ISSN: 2327-0411, 10.4018/978-1-7998-0137-5.ch005, pp. 98-125.
BC10) A. Massaro and A. Galiano, “Image Processing and Post-Data Mining Processing for Security in Industrial Applications: Security in Industry,” IGI Global 2020, Handbook of Research on Intelligent Data Processing and Information Security Systems, Ch. 6, DOI: 10.4018/978-1-7998-1290-6, ISBN13: 9781799812906, pp.117-146.
INTERNATIONAL CONFERENCES PROCEEDINGS
C1) A. Massaro, A. Di Donato and T. Rozzi, “Negative Uniaxial Behaviour of Laminated Polarization Beam-splitters”, presented to: IEEE 2002 European Gallium Arsenide and other Compound Semiconductors Application Symposium (Gaas), 32th European Microwave Week, Milano, Italy, Oct 11-15, 2002.
C2) A. Massaro, V. Mancini, A. Di Donato and T. Rozzi, “Coupling in Multilayered Thin Film Opical 3-D Waveguide”, presented to: IEEE 2003 European Gallium Arsenide and other Compound Semiconductors Application Symposium (Gaas), 33th European Microwave Week, Monaco, Germany, Oct 11-15, 2003.
C3) L. Pierantoni, M. Farina, C. Ciandrini, A. Massaro, C. Santantoni, and T. Rozzi, “Development of a Novel Full-Wave 3D-Solver for the Analysis of MMIC and Optical Integrated Circuits”, presented to: 2004 IEEE International Symposium on Antennas and Propagation, Monterey, CA, June 20-26, 2004, vol. 3, pp.3313-3316.
C4) A. Massaro, L. Pierantoni, C. Ciandrini, and T. Rozzi, “Analysis of Sensitivity for Low-Pass Multilayer Optical Filters”, presented to: IEEE 2004 European Gallium Arsenide and other Compound Semiconductors Application Symposium (Gaas-2004), 34th European Microwave Week, Amsterdam, The Netherlands, Oct 11-15, 2004.
C5) L. Pierantoni, S. Lindenmeier, A. Massaro, C. Santantoni and T. Rozzi, “Analysis of the EM Coupling Between Satellite Antennas”, presented to: IEEE 2004 European Gallium Arsenide and other Compound Semiconductors Application Symposium (Gaas-2004), 34th European Microwave Week, Amsterdam, The Netherlands, Oct 11-15, 2004.
C6) T. Rozzi, A. Di Donato, M. Farina, G. Venanzoni, A. Massaro, “On the use of generalized telegrapher’s equation in the synthesis of electro-optic modulator”, presented to: SPIE Integrated Optics and Photonic Integrated Circuit, Strasburgo 2004.
C7) L. Pierantoni, A. Massaro, and T. Rozzi, “Accurate Modeling of Integrated Multilayered Optical Devices by TLMIE Method”, Invited Paper in: 17th annual meeting of the IEEE Lasers & Electro-Optics Society, Puerto Rico, Nov. 7-11, 2004.
C8) A. Massaro, L. Pierantoni and T. Rozzi, “Accurate TLM-IE Modeling of Integrated Photonic Band Gap”, presented to: IEEE 2005 European Gallium Arsenide and other Compound Semiconductors Application Symposium (Gaas-2005), 35th European Microwave Week, Paris, France, Oct 3-4, 2005.
C9) A. Massaro, L. Pierantoni, T. Rozzi and Peter Russer, “Analytical Modelling of 3D-Dielectric Corner for E.M. Simulators”, presented to (oral presentation): IEEE 35th European Microwave Conference, Paris, France, Oct 3-6, 2005.
C10) A. Massaro, L. Pierantoni and T. Rozzi, “Full-Wave Analysis of Filtering Behaviour for Laminated Structures”, presented to: SPIE Optical System Design 2005, 12-16 September 2005, Jena, Proc. SPIE Vol.5962, pp.14-21.
C11) A. Massaro, L. Pierantoni and T. Rozzi, “Time-domain Modeling and Filtering Behaviour of Guided-wave Optics by Hertzian Potentials”, presented to (oral presentation): SPIE Photonics Europe, Strasburgo, Aprile 2006, Proc. SPIE, Vol.6183.
C12) L. Pierantoni, A. Massaro and T. Rozzi, “A TLM Node for the Diffraction by 3D-Dielectric Corners Based on the Simultaneous Transverse Resonance Method”, presented to (oral presentation): 2006 IEEE-MTT-s International Microwave Symposium, San Francisco, U.S.A., June 9-14, 2006, pp. 1077-1080.
C13) G. Franceschetti, T. Rozzi, L. Pierantoni, A. Massaro, “An innovative model of electromagnetic propagation in the urban environment”, presented to: 2006 IEEE AP-S International Symposium USNC/URSI/AMEREM Meeting, Albuquerque, NM, July 9-14, 2006, pp.3495-3498.
C14) A. Massaro, L. Pierantoni and T. Rozzi, “TLMIE Modeling of the TM-Passing Property of Integrated Waveguide with Laminated Cladding”, presented to: IEEE 36th European European Microwave Conference, 9th European Microwave Week, Manchester, UK, 10-15 September 2006, pp.1241-1243.
C15) L. Pierantoni, A. Massaro, A. Di Donato, D. Mencarelli and T. Rozzi, “Time-Domain Full-Wave solver for integrated optical waveguide”, presented to: XV Edition of the Optical Waveguide Theory and Numerical Modelling Workshop (OWTNM), Varese, Italy, April 20-21 2006, pp.11.
C16) A. Massaro, V. Errico, R. Cingolani, A. Passaseo and M. De Vittorio, “Design Criteria and 3D FEM Modeling of Air Hole Photonic Crystal”, presented to (oral presentation): SPIE Photonics Europe, April 2008. SPIE Proceeding, Vol. 6989, pp. 1-8.
C17) A. Massaro, V. Tasco, M. T. Todaro, M. De Vittorio, and A. Passaseo, “Novel time-domain circuit modelling of chi(2) nonlinear process in periodic optical waveguide,”, presented to (oral presentation): 9 th European Conference on Applications of Polar Dielectrics, August 2008. Proceeding ECAPD-9, pp. 50.
C18) A. Massaro, V. Tasco, M. T. Todaro, T. Stomeo, R. Cingolani, M. De Vittorio, and A. Passaseo, "Design and modeling of chi (2) second harmonic amplification in Circular Photonic Crystal," presented (oral presentation) to SPIE Symposium on Optics and Optoelectronics 20-23 April 2009, Prague. Proceeding SPIE vol. 7354.
C19) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, "Double grating design of 3D phase matched waveguide for second harmonic chi(2) process," presented (oral presentation) to SPIE Symposium on Optics and Optoelectronics 20-23 April 2009 ,Prague Proceeding SPIE vol. 7354.
C20) A. Massaro, V. Tasco, M. T. Todaro, R. Cingolani, M. De Vittorio, and A. Passaseo, "Accurate design and modeling of chi(2) nonlinear processes in periodic waveguide of by Hertzian Potential Method," presented (oral presentation) to SPIE Symposium on Optics and Optoelectronics 20-23 April 2009, Prague. Proceeding SPIE vol. 7354.
C21) A. Massaro, V. Tasco, M. T. Todaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Nonlinear GaAs/AlGaAs Second Harmonic Converters,” presented to PLMCN9, Lecce, April 2009, proceeding pp. 287-288.
C22) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Bragg Reflector By Means of Form Birefringence Effect in Dielectric Rings,” presented to PLMCN9, Lecce April 2009, Proceeding pp.285-286.
C23) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Anisotropic Effects in Circular Photonic Crystals,” IEEE Proceeding EuMIC Rome 2009, pp. 156- 159. Talk

C24) A. Massaro, R. Cingolani, A. Passaseo, and M. De Vittorio, “Floquet’s Design and Circuit Modeling of Discontinuous Planar Waveguides at High Frequencies,” IEEE Proceeding EuMA Rome 2009, pp 962-965. ISBN: 978-1-4244-4748-0. talk

C25) A. Massaro, V. Tasco, M. T. Todaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Design and Modeling of GaAs/AlGaAs Nonlinear Waveguides by Hertzian Potential Formulation,” IEEE Proceeding EuMA Rome 2009, pp. 719-722. Talk

C26) A. Massaro, I. Ingrosso, C. Giordano, M. T. Todaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “Micromachining Mo/ALN/Mo Piezoelectric Ring Resonators,” IEEE Proceeding EuMA Rome 2009, pp. 1646-1649. Poster

C27) V. Tasco, I. Tarantini, A. Campa, A. Massaro, T. Stomeo, G. Epifani, A. Passaseo, M. Braccini, M. C. Larciprete, C. Sibilia, F. A. Bovino, “GaN/AlGaN microcavities for enhancement of nonlinear optical effect”, SPIE conference, April 2010, Brussel. Proceeding SPIE, vol. 7713, 77131Q (2010).

C28) T. Stomeo, G. Epifani, V. Tasco, A. Massaro, I. Tarantini, A. Campa, M. De Vittorio, A. Passaseo, M. Braccini, M. C. Larciprete, C. Sibilia, F. A. Bovino, “Fabrication of GaN/AlGaN 1 D photonic crystals designed for nonlinear optical applications,” Bruxel, Proceeding SPIE vol. 7713, 771316 (2010).

C29) A. Massaro, R. Cingolani, M. De Vittorio, and A. Passaseo, “3D FEM modelling and Technology of Piezoelectric ring MEMS antenna,” Proceeding of MEMSWave 2010, 28 June-1 July (2010), P1.

C30) A. Massaro, G. Venanzoni, M. Farina, A. Morini, T. Rozzi, and R. Cingolani, M. De Vittorio, and A. Passaseo, “Experimental pressure sensing and technology of piezoelectric microwave/RF MEMS filters,” Proceeding of MEMSWave 2010, 28 June-1 July (2010), P2.

C31) A. Massaro, D. Caratelli, A. Yarovoy, and R. Cingolani, “FDTD Modelling of Wireless MEMS Antenna for Melanoma Skin Detection,” Proceeding of MEMSWave 2010, 28 June-1 July (2010), P6.

C32) F. Spano, A. Massaro, R. Cingolani, and A. Athanassiou, “Optical enhancement by means of gold particles and polymer concentration tuning in nanocomposite materials,” Proceeding of MNE 2010, P_NANO_119.

C33) A. Massaro, F. Spano, P. Cazzato, R. Cingolani, and A. Athanassiou, “Real time optical pressure sensing for tactile detection using gold nanocomposite material,” Proceeding of MNE 2010, P_NANO_121.

C34) C. La Tegola, A. Massaro, G. C. Anyfantis, D. Fragouli, P. D. Cozzoli, A. Athanassiou, “Stress-strain analysis of thermoplastic resin strengthened with metal nanoparticles.,”, Proceeding of MNE 2010.

C35) D. Caratelli, A. Massaro, A. Yarovoy, and R. Cingolani, “Accurate Time-Domain Modelling of MEMS Antennas for Wireless Telemetry Systems,” Proceeding of IEEE EuMW Paris, 2010, pp. 531-534.

C36) D. Tartarini, A. Massaro, and E. Mele, “Modeling by Hertzian Potentials Regarding Wavefront Propagation in a Material with Nano-defects on a GPU based system,” Proceeding of TNT 2010, Braga (Portugal): http://www.tntconf.org/2010/abstracts_TNT2010/TNT2010_Tartarini.pdf .

C37) D. Caratelli, A. Massaro, A. L. Ekuakille, R. Cingolani, and A. Yarovoy, "Full-wave Analysis of Reconfigurable Antenna Sensors for Non-Invasive Melanoma Detection," IEEE Biomedical and Environmental Measurements and Instrumentation SSD'11 Conference in Sousse, March 22-25, 2011, SSD11-SCI-1569387041.

C38) D. Ramaccia, F. Bilotti, A. Toscano, A. Massaro and R. Cingolani, “Electrical and Radiation Properties of a Horn Nano-Antenna at Near Infrared Frequencies” Proceeding of IEEE Antennas and Propagation Conference (APSURSI), pp. 2407-2410, Spokane, USA, July 3-8, 2011. (invited: invitation addressed to Alessandro Massaro).

C39) M. Cacciola, A. Lay-Ekuakille, A. Massaro, F. Spano, D. Caratelli, F.C. Morabito, R. Cingolani, A. Athanassiou, A. Trotta, “Modelling of Implantable Sensor Packaging based on Biocompatible Polymers”, Proceeding of IEEE MeMeA International Symposium on Medical Measurements and Applications 2011, pp. 43-48.

C40) D. Caratelli, A. Yarovoy, A. Massaro, R. Cingolani, A. Lay-Ekuakille, “Locally Conformal FDTD Modeling of MEMS-Based Antenna Sensors for Melanoma Detection”, Proceeding of IEEE MeMeA International Symposium on Medical Measurements and Applications 2011, pp. 103-106.

C41) N. Mammone, A. Lay-Ekuakille, F. C. Morabito, A. Massaro, S. Casciaro, A. Trabacca, “Analysis of absence seizure EEG via Permutation Entropy spatio-temporal clustering”, Proceeding of IEEE MeMeA International Symposium on Medical Measurements and Applications 2011, pp. 532-535.

C42) A. Lay-Ekuakille, P. Vergallo, A. Massaro, D. Caratelli, A. Trotta, R. Malaric, “Video Surveillance and Signal Processing of Pipeline Liquid Flow,” Proceeding of 2nd IMEKO TC 11 International Symposium METROLOGICAL INFRASTRUCTURE June 15-17, 2011, Cavtat, Dubrovnik Riviera, Croatia, pp.136-140, ISBN:9781618391186.

C43) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou “MEG/STRD Modeling of Optical Antenna Sensors as Micro Rectangular Apertures,” Proceeding of IEEE NUSOD 2011, Rome, pp. 65-66, 5-8 September 2011, DOI: 10.1109/NUSOD.2011.6041140, ISSN: 2158-3234.

C44) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou “FEM Modeling of Conductivity and Electrical Coupling in Polymeric Nanocomposite Material,” Proceeding of IEEE NUSOD 2011, Rome, pp. 85-86, 5-8 September 2011. DOI: 10.1109/NUSOD.2011.6041151, ISSN: 2158-3234.

C45) D. Tartarini, A. Massaro, “GPU Implementation of Hertzian Potential Formulation for Simulation of Nanosensor,” Proceeding of IEEE NUSOD 2011, Rome, pp. 109-110, 5-8 September 2011, DOI: 10.1109/NUSOD.2011.6041164, ISSN: 2158-3234.

C46) L. Chiodo, A. Massaro, R. Cingolani, A, Romero, A. Rubio, “Characterization of TiO2 Atomic Crystals for Nanocomposite Materials Oriented to Optoelectronics,” Proceeding of IEEE NUSOD 2011, Rome, pp. 157-158, 5-8 September 2011, DOI: 10.1109/NUSOD.2011.6041192, ISSN: 2158-3234.

C47) D. Caratelli, A. Yarovoy, A. Lay-Ekuakille, A. Massaro, Z.-H. Li, “Design and Full-Wave Analysis of Nonconformal Fermat-like Spiral Multi-Port Microantenna Sensors,” Proceeding of IEEE Sensors 2011, Limerik, Ireland, 2011, pp. 720-723.

C48) D. Caratelli, A. Massaro, A. Lay-Ekuakille, Zhi-Hong Li, “Reconfigurable Nonconformal Spiral Microantenna for Wireless Communication Devices,” Proceeding IEEE International Workshop on Measurements and Networking, Capri, Italy, 2011, pp. 27-30.

C49) A. L. Ekuakille, N. I. Giannoccaro, A. Massaro, L. Spedicato, P. Vergallo, R. Cingolani, A. Athanassiou, “New Generation of Optical Robotic Sensor Applied to Small Notch Detection,” IEEE Proceeding of Fifth International Conference on Sensing Technology, pp. 32-35, Palmerston North, New Zealand, Nov. 28th - Dec. 1st, 2011.

C50) A. L. Ekuakille, P. Vergallo, N. I. Giannoccaro, A. Massaro, D. Caratelli, “Prediction and Validation of Outcomes from Air Monitoring Sensors and Networks of Sensors,” IEEE Proceeding of Fifth International Conference on Sensing Technology, pp. 78-83, Palmerston North, New Zealand, Nov. 28th - Dec. 1st 2011.

C51) N.I. Giannoccaro, A. Massaro, L. Spedicato, F. Spano, A. Lay Ekuakille, P. Vergallo, "Mechanical Characterization of Totally Optical Tactile Sensor Oriented on Bio-Applications", IEEE MEMEA Conference 2012, pp. 57-60.

C52) A. Lay Ekuakille, P. Vergallo, D. Stefano, A. Massaro, A. Trabacca, M. Cacciola, D. Labate, F.C. Morabito, R. Morello, "Diffusion Tensor Imaging Measurements for Neuro-Detection," IEEE MEMEA Conference 2012, pp. 158-161.

C53) P. Vergallo, A. Lay Ekuakille, N. I. Giannoccaro, A. Massaro, S. Urooj, D. Caratelli, and A. Trabacca "Processing EEG Signals through Beamforming Techniques for Seizure Diagnosis,",Sixth International Conference on Sensing Technology ICST, 2012, pp. 497-501.

C54) G. De Tullio, D. Caratelli, S. Casciaro, F. Conversano, A. Massaro, A. Guarini, "Identifying Malignant Lymph Nodes by Nanoparticle Modelling and Simulations: a Preliminary Investigation", Abstract P1095, ABSSUB-5850, 19th Congress of the European Hematology Association (EHA 19), Milano, 12-15 Giugno 2014.

C55) G. Cicala, G. Perna, D. Marzulli, D. Melisi, G. De Pascali, A. Valentini, G. S. Senesi, A. Massaro, L. Velardi, V. Capozzi, “Self-Assembled Structures in Nanodiamond Layer by Spray Technique,” Abstract pp. 01.074, XII International Conference on Nanostructured Materials (NANO 2014) July 13-18, 2014 Moscow, Russia.

C56) A. Valentini, D. Melisi, M.A. Nitti, M. Valentini, L. Velardi, G.S. Senesi, A. Massaro, G. Cicala, “Photoemission response of spray deposited diamond layers at low temperature,” Abstract P2.037, International Conference on Diamond and Carbon Materials, 7-11 September 2014, Melia Castilla, Madrid, Spain.

C57) G. S. Senesi, G. Cicala, A. Massaro, L. Velardi, “Nanodiamond Layers/Spots for Biosensing,” International Conference on Applied Mineralogy & Advanced Materilas AMAM 2015, 7-12 June 2015, Proceeding of Abstracts vol. 4, p. 59, ISBN: 978-88-7522-092-1.

C58) G. Cicala, A. Massaro, L. Velardi, A. Valentini, F. Adamo, F. Attivissimo, “DLC Integrated GHz Antenna for Aerospace,” Proceeding of 2nd IEEE International Workshop on Metrology for Aerospace, 3-5 June 2015, ISBN:978-1-4799-7568-6, pp. 261-265.

C59) N. I. Giannoccaro, L. Spedicato, A. L. Ekuakille, A. Massaro, “Automatic Diagnostic by Using a New Optical Sensor,” Proceeding of 2nd IEEE International Workshop on Metrology for Aerospace, 3-5 June 2015, ISBN:978-1-4799-7568-6, pp. 266-269.

C60) A. Massaro, G.S. Senesi, L. Velardi, G. Cicala, A. Valentini, D. Marzulli, “Local Electrical Current and Voltage of Self-Assembled Nanodiamond Pillars,” oral, IEEE NANOFIM 2015, Lecce 24-25 June 2015, ISBN: 9 788896 496381, pp. 175- 178.

C61) F. Spano, R.M. Rossi, A. Massaro, A. Lay-Ekuakille, “AFM Laser Texturing on Chitosan/Au nanocomposite Materials for Lithography Technique,” oral, IEEE NANOFIM 2015, Lecce 24-25 June 2015, ISBN: 9 788896 496381, pp. 191-195.

C62) A. Lay-Ekuakille, G. Cicala, A. Massaro, L. Velardi, G.S. Senesi, “Diamond Films for Electrical and Electronic Circuitry,” poster, IEEE NANOFIM 2015, Lecce 24-25 June 2015, ISBN: 9 788896 496381, pp. 232- 235.

C63) A.Lay-Ekuakille, G. Griffo, G. Cicala, A. Massaro, G. Gigli, F. Conversano, S. Casciaro, “Nanocircuits for a Bio-Implantable System in EEG Signal Acquisitions,” poster, IEEE NANOFIM 2015, Lecce 24-25 June 2015, ISBN: 9 788896 496381, pp. 236-239.

C64) F. Spano, A. Dabrowska, B.M. Quandt, L. Boesel, R.M. Rossi, A. Massaro, A. Lay-Ekuakille, “Flexible touch sensors based on nanocomposites embedding polymeric optical fibers for artificial skin applications”, oral, Proceeding of IEEE NANO2015 15th International Conference on Nanotechnology, 27-30 July 2015, Rome (Italy), 978-1-4673-8156-7/15/$31.00 ©2015 IEEE.

C65) A. Galiano, A. Massaro, B. Boussahel, D. Barbuzzi, F. Tarulli, L. Pellicani, L. Renna, A. Guarini, G. De Tullio, G. Nardelli, R. Bonaduce, C. Minoia, S. Ciavarella, V. De Fazio, A. Negri, C. Marchionna “Improvements in Haematology for Home Health Assistance and Monitoring by a Web based Communication System,” Proceeding of IEEE International Symposium on Medical Measurements and Applications (MeMeA), 15-18 May 2016.

C66) A. Massaro, D. Barbuzzi, V. Vitti, A. Galiano, M. Aruci, G. Pirlo, “Predictive Sales Analysis According to the Effect of Weather,” Proceeding of the 2nd International Conference on Recent Trends and Applications in Computer Science and Information Technology, Tirana, Albania, November 18 - 19, pp. 53-55, 2016.

C67) A. Massaro, V. Maritati, N. Savino, A. Galiano, “Neural Networks for Automated Smart Health Platforms oriented on Heart Predictive Diagnostic Big Data Systems,” IEEE Proceeding AEIT 2018. 10.23919/AEIT.2018.8577362.

C68) A. Massaro, I. Manfredonia, A. Galiano, N. Contuzzi, “Inline Image Vision Technique for Tires Industry 4.0: Quality and Defect Monitoring in Tires Assembly,” oral presentation 2019 IEEE International Workshop on Metrology for Industry 4.0 and IoT, Proceeding of IEEE pp. 54-57.

C69) A. Massaro, I. Manfredonia, A. Galiano, L. Pellicani, and V. Birardi, “Sensing and Quality Monitoring Facilities Designed for Pasta Industry Including Traceability, Image Vision and Predictive Maintenance,” oral presentation 2019 IEEE International Workshop on Metrology for Industry 4.0 and IoT, IEEE Proceeding pp. 68-72.

C70) A. Massaro, N. Contuzzi, A. Galiano, I. Manfredonia, and B. Xhahysa, “A Preliminar Research Industry Project: a Case of Study defining Requirements for Knowledge Base Gain and Technological Upgrade in Industry Working in Train Parts Processing and Testing,” 2019 IEEE International Workshop on Metrology for Industry 4.0 and IoT, IEEE Proceeding pp. 172-176.

C71) A. Massaro, I. Manfredonia, A. Galiano, and B. Xhaysa, “Advanced Process Defect Monitoring Model and Prediction Improvement by Artificial Neural Network in Kitchen Manufacturing Industry: a Case of Study,” oral presentation 2019 IEEE International Workshop on Metrology for Industry 4.0 and IoT, IEEE Proceeding pp. 64-67.

C72) N. Contuzzi, A. Massaro, I. Manfredonia, A. Galiano, and B. Xhahysa, “A Decision Making Process Model based on a Multilevel Control Platform Suitable for Industry 4.0,” oral presentation 2019 IEEE International Workshop on Metrology for Industry 4.0 and IoT, IEEE Proceeding pp.127-131.

C73) A. Lay-Ekuakille; F. Spano ; P. Kapita Mvemba ; A. Massaro ; A. Galiano ; S. Casciaro ; F. Conversano, “Conductivity Image Characterization of Gold Nanoparticles based-Device through Atomic Force Microscopy,” IEEE 2018 Nanotechnology for Instrumentation and Measurement (NANOfIM), 11 Aprile 2019, 10.1109/NANOFIM.2018.8688617

NATIONAL CONFERENCES PROCEEDINGS AND CONTRIBUTES
CN1) A. Massaro, L. Pierantoni, T. Rozzi, “Nuovo modello di commutatore ottico di polarizzazione mediante ologramma”, XV Riunione Nazionale di Elettromagnetismo (RiNEM), Cagliari, 13-16 Settembre 2004.
CN2) A. Massaro, L. Pierantoni, T. Rozzi, “Modellizzazione Numerica Accurata di Dispositivi Ottici Multistrato”, Fotonica 2005, Trani (BA), 30 Maggio- 1 Giugno 2005.
CN3) A. Massaro, T. Rozzi, “Modellizzazione numerica nel dominio del tempo mediante l’uso dei potenziali Hertziani applicata a guide ottiche”, Rinem 2006, Settembre 2006, pp.226-229.
CN4) A. Massaro, L. Pierantoni, T. Rozzi, “Radiazione di fibre ottiche con diverso angolo di taglio per applicazioni in biomedica e nelle telecomunicazioni”, Rinem 2006, Settembre 2006, pp. 298-301.
CN5) A. Massaro, G. Venanzoni, M. Farina, A. Morini, T. Rozzi, R. Cingolani, A. Passaseo, M. De Vittorio, “Measurements and Technology of AlN Microwave/RF MEMS Filter with Band Gap Property at High Frequencies,” Proceeding of Rinem, Benevento 2010, pp. 816-817. (ISBN:978-88-905261-1-4)
CN6) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou, “Tuning Concept of PDMS Nanocomposite Material for Optical Fiber Enhancement,” META 2010 Proceeding.
CN7) A. Massaro, D. Caratelli, A. Yarovoy, R. Cingolani, and A. Athanassiou, “Accurate Circuit Modeling for Plasmon Probe Design,” META 2010 Proceeding.
CN8) A. Massaro, F. Spano, R. Cingolani, and A. Athanassiou, “Pillar Type PDMS Nanocomposite Optical Antenna for Liquid Detection Systems,” META 2010 Proceeding.
CN9) P. Vergallo, A. Lay-Ekuakille, A. Massaro, D. Caratelli, A. Trotta, “Misura della Distanza con Tecniche di tipo Beamforming,” XXVIII Congresso Nazionale GMEE 2011.
CN10) A. Massaro, L. Velardi, G. S. Senesi, G. Carbone, and G. Cicala, “Biomedical Prosteses Coated by Tailored MWPECVD Nanocrystallyne Diamond Films,” IV Workshop Plasmi Sorgenti e Biofisica, Lecce, 2014. eISBN 978-88-8305-108-1 (electronic version) http://siba-ese.unisalento.it
CN11) L. Velardi, A. Massaro, G. S. Senesi, M. A. Nitti, G. De Pascali, M. Valentini, A. Valentini, and G. Cicala, “Comparative Photoemission Study between Nanocrystalline Diamond Films and Nanodiamond Layers,” IV Workshop Plasmi Sorgenti e Biofisica, Lecce, 2014. eISBN 978-88-8305-108-1 (electronic version) http://siba-ese.unisalento.it
Seminars:
[S1] A. Massaro, “Electromagnetic characterization of sensors”: IIT Seminar 2010.

[S2] A. Massaro, invited talk “Sensori Nanocompositi per la Robotica” in "Seminario di eccellenza Italo Gorini- Scuola di Dottorato V ciclo, I anno - Misure per l' Industria e l' Ambiente”, Bari 5-9 Settembre 2012.

[S3] A. Massaro: oral presentation I Meeting nazionale della Rete di Sanità Digitale eSanit@ -La riorganizzazione del mercato dell’ ICT per la Sanità. Azioni e programmazione degli investimenti IT per l’evoluzione dei sistemi informativi verso il FSE- Villa Romanazzi, Bari, 6 Luglio 2017 (II Sessione: “FSE. La progettazione aziendale e regionale. Lo stato evolutivo dei SIS e i bisogni delle aziende sanitarie e degli stakeholder dell’industria.”).

[S4] A. Massaro: oral presentation Meeting (Workshop tecnico-divulgativo) ‘Nuove tecnologie per il risparmio idrico in agricoltura’ Progetto IRRI-TECH: confronto tra gli stakeholders. Presentation title: Le nuove tecnologie per la gestione remota degli idranti – Istituto Agronomico Mediterraneo di Bari (CIHEAM-IAMB) Valenzano (BA), 22 Novembre 2018.

[S5] A. Massaro: oral presentation Rotary meeting: “Ricerca Industriale Applicata al Territorio” 29 March 2019, Altamura, Italy.

[S6] A. Massaro: oral presentation at forum τέχνη “Nuovo Ecosistema Universitario per la Ricerca, Start up e Produzione” 28 March 2019, University Quagliarello, Bari, Italy.

[S7] A. Massaro: oral presentation at: Forum 2019 Mediterraneo in Sanità (20 Settembre 2019- Fiera del Levante).

[S8] A. Massaro: oral presentation 4 October 2019 Congresso Coscioni, Bari: “Modelli di utilità sociale nell’ambito dell’intelligenza artificiale” [Social Utility Models of in the field of artificial intelligence].

[S9] A. Massaro: Sicurezza e utenti finali: International Business Forum, 7-8 Nov. 2019, Ostuni (Br).

[S10] A. Massaro: L’intelligenza Artificiale in Oncologia: Opportunità e Rischi sull’Umanizzazione delle Cure. Congresso “Novità Terapeuriche in Oncologia alle Soglie del 2020”, Bari 16 Dicembre 2019.

[S11] A. Massaro, lezioni integrative al corso di insegnamento di Elementi di Biofisica Cellulare (Corso di Laurea Triennale in Ingegneria dei Sistemi Medicali – Politecnico di Bari): “Metodiche classiche e moderne per lo studio del potenziale di membrana e delle correnti ioniche transmembranarie e intercellulari” (lezione 1); “Metodi ottici come metodi d’indagine in fisiologia” (lezione 2).

Patents:

[B1, B1_E, B1_U] K. Aoki, M. De Vittorio, T. Stomeo, F. Pisanello, A. Massaro, L. Martiradonna, S. Sabella, R. Rinaldi, Y. Arakawa, R. Cingolani, and P. Pompa ,“Procedimento per la rivelazione di un analita, con l'impiego di cristalli fotonici risonanti e relativo dispositivo”;“A Method of Identifying a Target Analyte Using Photonic Crystal Resonators and Related Device,” ” Codes: TO2008A000614; EP 2154515A1, US 2010/0028898 A1 (4 Feb. 2010).

[B2] A. Massaro, F. Spano, P. Cazzato, R. Cingolani, A. Athanassiou, “Punta per un dispositivo di rilevamento ottico di un oggetto tridimensionale, particolarmente per uso in campo medico, e dispositivo di rilevamento ottico comprendente una tale punta”, Code: TO2011A001178.

[B3] G. Cicala, G. De Pascali, A. Massaro, D. Melisi, A. Valentini, L. Velardi, “Fotocatodi ad alta efficienza per ultravioletto a base di nanodiamante (High-Efficiency Nanodiamond-Based Ultraviolet Photocathodes)” Domanda di brevetto N. 102015000053374 (UB2015A003768); WO 2017/051318A1.

Projects

Projects (as scientific responsible, co-worker and scientific coordinator), Research & Development in Industry:
• [P1] Seed Project CNR INFM (2008) project: “Nonlinear effects in GaN/AlGaN photonic crystals for multiplexing applications”.
• [P2] Cineca INFM (2008) project: "Electromagnetic modelling of fluorescence near metal nanostructres".
• [P3] Cineca INFM (2012) project: “SENTInEl” (simulations of nanocomposite solar cells).
• [P4] FIRB MIUR project: ‘Metodi innovativi per il modellamento e la progettazione di dispositivi e sottosistemi avanzati a radiofrequenza per comunicazioni multimediali”.
• [P5] PRIN 2005 project: “Fabbricazione di nanosensori a cristallo fotonico bidimensionale” [Fabrication of Bidimensional Photonic Crystal Nanosensors].
• [P6] PON01_02782 project (IIT project scientific responsible): “Nuove strategie nanotecnologiche per la messa a punto di farmaci e presidi diagnostici diretti verso cellule cancerose circolanti- New strategies for the setting up of drugs and direct to diagnostic presidi circulating cancer cells”.
( ref: http://bandi.miur.it/bandi.php/public/fellowship/id_fellow/19812 ).
• [P7] PON03PE_00067_6 “APULIA SPACE” project: “Implementazione del diamante MWPECVD e progettazione di un catodo neutralizzatore”.
• [P8] Scientific Responsible of the Industry Project: "Applicativo software mobile per il riconoscimento di persona mediante algoritmi identificativi di punti corrispondenti a tratti somatici rilevanti"[Mobile Software Tool for Face Recognition by means of Identification Algorithms of Points Corresponding to the Somatic Relevant Features] (Dyrecta Lab srl activity). Period: from 01-06-2015 to 31-05-2016 [J77].
• [P9] Scientific Respconsible of the Industry Project: "Analisi di riconoscimento facciale da PC di una persona mediante applicativo software basato su criteri di riconoscimento di dati matriciali memorizzati da rilievo di immagini"[Face Recognition by a PC Tool based on Recognition Criteria Applied on Matrix Data of stored images]. (Dyrecta Lab srl activity). Period: from 01-06-2015 to 31-05-2016 [J85].
• [P10] Scientific Responsible of the Industry Project: "Analisi multi-dominio per l'archiviazione ed il ritrovamento automatico dei documenti in un processo di industrializzazione" [Multi-Domain Analysis for Document Storage and Recognition oriented on Industry Process]. (Dyrecta Lab srl activity). Period: from 30-06-2015 to 30-06-2017 [J84].
• [P11] Scientific Responsible of the Industry Project: "Attività di sviluppo sperimentale di una piattaforma produttiva di tipo seamless" [Sperimental Development Activity of a Production Platform Seamless Type] FIT - Fondo Innovazione Tecnologica. (Dyrecta Lab srl activity). Period: from 01-05-2015 to 31-12-2017.
• [P12] Scientific Responsible of the Industry Project: "Sistema di business intelligence di tipo ‘embedded’ basato su prediction real time in sistemi BigData orientati al settore di calzature, accessori e moda-‘Predishoes’"[Embedded Business Intelligence System based on Real Time Prediction in Big Data Systems oriented on Shoes, Accessories and Fashion Market ‘Predishoes’]. (Dyrecta Lab srl activity). Period: from 01-02-2016 to 31-07-2018 [J103],[C66],[NJ2].
• [P13] Scientific Responsible of the Industry Project: "Tracciabilità della produzione/distribuzione dei prodotti agroalimentari biologici mediante tecnologia RFID" [Traceability of Production/Distribution of biological food products by means of RFID Technology]. (Dyrecta Lab srl activity). Period: from 01-02-2016 to 31-12-2017.
• [P14] Scientific Responsible of the Industry Project: "Studio Applicazione e Sperimentazione di Soluzioni Innovative per Sistemi di Videosorveglianza Integrata e Sicurezza in Remoto con Riconoscimento e Archiviazione Dati: ‘CEPIM SURVEILLANCE SECURITY’” [Study Application and Experimentation of Innovative Solutions for Video Surveillance Integrated Systems and Remote Security with Recognition and Data Archiving: ‘CEPIM SURVEILLANCE SECURITY’]. (Dyrecta Lab srl activity). Period: from 01-03-2016 to 31-12-2017 [J93].
• [P15] Scientific Responsible of the Industry Project: "Sistema di supporto alle decisioni amministrative per la Governance dell'ente Università ‘DSS UNIVERSITY’" [Decision Support System for administrative governance of Universities].(Dyrecta Lab srl activity). Period: from 01-03-2016 to 28-02-2019.
• [P16] Scientific Responsible of the Industry Project: "Modello completo di Visual Merchandising per la GDO focalizzato sull'acquisto impulsivo della clientela ‘Impulse Buying Visual Merchandising’" [Complete model of Visual Merchandising for GDO focused on impulse buying ‘Impulse Buying Visual Merchandising’]. (Dyrecta Lab srl activity). Period: from 01-03-2016 to 31-12-2017.
• [P17] Scientific Responsible of the Industry Project: "Portale innovativo a contenuti multimediali ed applicazione in visore per il commercio e la fornitura per HORECA ‘Visual Commerce Multimedia’ " [Innovative portal with multimedia contents and application in viewer for marketing and HORECA supply 'Visual Commerce Multimedia']. (Dyrecta Lab srl activity).Period: from 01-06-2016 to 30-05-2017.
• [P18] Scientific Responsible of the Industry Project: "Modelli di marketing applicati all GDO e orientati al Visual Merchandising per la gestione dei prodotti food, non food e bevande su scaffali ‘Shelf Marketing GDO Modeling’ " [Marketing models applied to the GDO and oriented on the Visual Merchandising for the management of food products, non food and drinks allocated on shelves. - Shelf Marketing GDO Modeling]. (Dyrecta Lab srl activity). Period: from 15-06-2016 to 14-06-2017.
• [P20] Scientific Responsible of the Industry Project: "Sistema intelligente integrato di market basket analysis e facing di prodotto" [Integrated intelligent system of market basket analysis and product facing]. (Dyrecta Lab srl activity). Period: from 19-07-2016 to 31-12-2017.
• [P21] Scientific Responsible of the Industry Project: "Piattaforma universale multilivello di front-office virtuale intelligente ‘Multi Level Virtual Front Office’" [Multi-level universal virtual front-office platform ‘Multi Level Virtual Front Office’]. (Dyrecta Lab srl activity). Period: from 01-08-2016 to 31-07-2017.
• [P22] Scientific Responsible of the Industry Project: "Modelli di Visual Merchandasing mediante reti neurali ‘Neural Net Visual Merchandising’" [Visual Merchandising Neural Network Modeling ‘Neural Net Visual Merchandising’]. (Dyrecta Lab srl activity). Period: from 01-09-2016 to 31-08-2017.
• [P23] Scientific Responsible of the Industry Project: "Sistemi intelligenti per l'automazione dei processi delle PMI nel contesto applicativo Industria 4.0 ‘PMI IoTndustry 4.0’" [Intelligent systems for the automation of SME processes in the application context of Industry 4.0 ‘PMI IoTndustry 4.0’]. (Dyrecta Lab srl activity). Period: from 21-09-2016 to 21-09-2019.
• [P24] Scientific Responsible of the Industry Project: "Modello dinamico di identificazione della tipologia del prezzo ottimale dei pneumatici mediante applicazione web ‘Tires Detection and Dynamic Pricing’" [Dynamic model for identifying the type and optimal price of tires through a web application ‘Tires Detection and Dynamic Pricing’]. (Dyrecta Lab srl activity). Period: from 01-10-2016 to 30-03-2017 [J87].
• [P25] Scientific Responsible (R&D chief) and Project Manager of the project for Acquedotto Pugliese (AQP): “Sistema tecnologico non invasivo per il rilevamento e la localizzazione intelligente delle perdite idriche mediante immagini termiche automatizzate, sistema di monitoraggio/alerting, image processing e sistema decisionale di gestione interventi con tecnologie alternative ‘ThermRadLeack’" [Non-invasive technological system for the intelligent detection and localization of water leackage by means of automated thermal images, monitoring / alerting system, image processing, and decision-making systems for managing interventions with alternative technologies ‘ThermRadLeack’]. POR PUGLIA FESR FSE 2014-2020, Asse I , Azione 1.4 “Interventi di promozione di nuovi mercati per l’innovazione” -OpenLabs. Period: from 14-11-2016 to 22-05-2018.
• [P26] Scientific Responsible of the Industry Project: "Piattaforma di data fusion orientata al data mining processing dei dati della filiera del grano duro ‘Wheat Data Fusion’" [Data fusion platform oriented to data mining processing of durum wheat data ‘Wheat Data Fusion’]. (Dyrecta Lab srl activity). Period: from 22-12-2016 to 31-12-2019 [J97].
• [P27] Scientific Responsible of the Industry Project: "Modello Big Data integrato di business intelligence dinamico basato sull'ottimizzazione di algoritmi di data mining operanti su due piattaforme ACI Global distinte: ‘ACI B.I. Balancing’" [Integrated Big Data model of dynamic business intelligence based on the optimization of data mining algorithms operating on two distinct ACI Global platforms ‘ACI B.I. Balancing’]. (Dyrecta Lab srl activity). Period: from 02-01-2017 to 01-04-2018.
• [P28] Scientific Responsible of the Industry Project: "Modello di analisi a due livelli per l'ottimizzazione dei servizi ACI e la pianificazione di business intelligence ‘ACI B.I. Level Strategic Marketing’" [Two-level analysis model for the optimization of ACI services and business intelligence planning ‘ACI B.I. Level Strategic Marketing’]. (Dyrecta Lab srl activity). Period: from 02-01-2017 to 01-01-2018.
• [P29] Scientific Responsible of the Industry Project: "Innovazione di infrastruttura comunicativa / informativa per l'automazione intelligente e l'indicizzazione dell'efficientamento delle risorse attinenti ai processi ACI Global ‘Automation Free Resources’" [Innovation of communication / information infrastructure for intelligent automation and indexing of the efficiency of resources related to ACI Global processes 'Automation Free Resources']. (Dyrecta Lab srl activity. Period: from 02-01-2017 to 01-07-2018.
• [P30] Scientific Responsible of the Industry Project: "Sistema innovativo di fertirrigazione e di Decision Supporting System orientato alla produzione di IV gamma ‘DSS Fertirrigation 4th range’" [Innovative system of fertigation and Decision Supporting System oriented to the production of IV range 'DSS Fertirrigation 4th range']. (Dyrecta Lab srl activity). Period: from 02-01-2017 to 30-12-2017.
• [P31] Scientific Responsible of the Industry Project: "Procedure di controllo e management dei processi aziendali di pulizia civile/industriale mediante applicazione di algoritmi intelligenti di data mining ‘Cleaning Dashboard’" [Control procedures and management of civil / industrial cleaning company processes by the application of intelligent data mining algorithms 'Cleaning Dashboard']. (Dyrecta Lab srl activity). Period: from 02-01-2017 to 31-12-2017.
• [P32] Scientific Responsible of the Industry Project: "Progetto di tecnologia di comunicazione macchina / processi orientato alla produzione della pasta ‘Pasta IoT 4.0’” [Project of machine / process communication technology oriented to the production of Pasta 'Pasta IoT 4.0']. (Dyrecta Lab srl activity) Period: from 20-01-2017 to 19-01-2018 [C69].
• [P33] Scientific Responsible of the Industry Project: "Sensoristica integrata per il monitoraggio e la sicurezza dei cantieri ‘SMART WORKING SITE’" [Integrated sensors for monitoring and safety of working places 'SMART WORKING SITE']. (Dyrecta Lab srl activity) Period: from 01-02-2017 to 31-10-2017.
• [P34] Scientific Responsible of the Industry Project: "Piattaforma avanzata di gestione ordini e di interfacciamento gestionale orientata all'Analytics Big Data ‘W-ORD’" [Advanced order management platform and interface oriented on Big Data analysis 'W-ORD']. (Dyrecta Lab srl activity. Period: from 15-03-2017 to 14-03-2017.
• [P35] Scientific Responsible of the Industry Project: "Piattaforma intelligente di configurazione 3D real-time per la personalizzazione dei prodotti di commercio elettronico ‘3D Web Configurator’" [Intelligent 3D real-time configurable platform oriented on customization of electronic commerce products '3D Web Configurator']. (Dyrecta Lab srl activity). Period: from 03-04-2017 to 02-04-2019.
• [P36] Scientific Responsible of the Industry Project: "Sistema MultiPresa/Data Mining Intelligente orientato al Building Electrical Management ‘Intelligent Electrical Outlets’". [Intelligent Electrical Multi Outlets/Data Mining System oriented to Building Electrical Management ‘Intelligent Electrical Outlets’]. (Dyrecta Lab srl activity). Period: from 02-05-2017 to 31-12-2017.
• [P37] Scientific Responsible of the Industry Project: "Realizzazione programma computerizzato per il trattamento dei disturbi del linguaggio ‘Voice Analysis’" [Creation of a computerized program for the treatment of speech disorders 'Voice Analysis']. (Dyrecta Lab srl activity) Industry: Istituto Santa Chiara s.r.l.. Period: from 19-06-2017 to 18-05-2018.
• [P38] Scientific Responsible of the Industry Project: "Sistemi software interfacciabili e modulari orientati alla comunicazione di Industria 4.0 e all'analisi avanzata dei dati ‘ModularIndustry4.0’" [Interface-oriented and modular software systems oriented on Industry 4.0 communication and on advanced analysis 'ModularIndustry4.0']. (Dyrecta Lab srl activity). Period: from 01-06-2017 to 30-03-2018 [J91].
• [P39] Scientific Responsible of the Industry Project: "Algoritmi di intelligenza artificiale applicati agli output dei software gestionali per la predizione di vendite ‘SALES INTELLIGENCE’” [Artificial intelligence algorithms for sales prediction applied to the outputs of management software: ‘SALES INTELLIGENCE’]. (Dyrecta Lab srl activity) Period: from 09-06-2017 to 07-12-2017 [J92].
• [P40] Scientific Responsible of the Industry Project: "Sistema di Supporto Decisionale (DSS) per la vendita online multistore basato su regole di priorità ‘DSS MULTI-E-COMMERCE RULES MANAGEMENT’" [Decision Support System (DSS) for online multistore sales based on priority rules ‘DSS MULTI-E-COMMERCE RULES MANAGEMENT’]. (Dyrecta Lab srl activity). Period: from 12-06-2017 to 11-06-2018.
• [P41] Scientific Responsible of the Industry Project: "Piattaforma di scheduling intelligente per attività di supporto alla clientela e reti neurali artificiali applicate alla predizione di manutenzione delle tecnologie hardware/software ‘Scheduler/neural black box risk prediction’" [Intelligent scheduling platform for customer support activities and artificial neural networks applied to maintenance prediction of hardware / software technologies ‘Scheduler/neural black box risk prediction’]. (Dyrecta Lab srl activity). Period: from 30-05-2017 to 29-05-2019.
• [P42] Scientific Responsible of the Industry Project: “Procedure Innovative e Processing Intelligente delle Misurazioni Radiometriche per la Predictive Maintenance degli Impianti Tecnologici e il Quality Control di Testing dei Componenti: ‘Infrared PredictiveMaintenance/Quality’” [Innovative Procedures and Intelligent Processing of Radiometric Measurement for Predictive Maintenance of Technological Systems and for Component Testing Quality Control ‘Infrared PredictiveMaintenance / Quality’]. (Dyrecta Lab srl activity). Period: from 15-03-2018 to 31-12-2019.
• [P43] Scientific Responsible of the Industry Project: “Intelligenza Artificiale Applicata alla GDO per il Volantino Dinamico e la Spesa Intelligente mediante utilizzo di una Mobile APP Evoluta e Profilata alla Clientela: ‘GDO ARTIFICIAL INTELLIGENCE’” [Artificial Intelligence Applied to the GDO for the Dynamic Flyer and the Smart Spending through the use of a Mobile Evolved APP Profiled to the Customers‘GDO ARTIFICIAL INTELLIGENCE’]. (Dyrecta Lab srl activity). Period: from 01-02-2018 to 31-01-2020.
• [P44] Scientific Responsible of the Industry Project: “Process, Design, Management and Marketing in Lighting Production ‘DE.LI.PRO’ ”. (Dyrecta Lab srl activity). Period: from 22-01-2018 to 13-04-2018.
• [P45] Scientific Responsible of the Industry Project: “Realizzazione di membrane capillari polimeriche micro-strutturate per emodialisi/emofiltrazione ‘EmoCapillaryMembrane’” [Realization of micro-structured polymeric capillary membranes for hemodialysis / hemofiltration ‘EmoCapillaryMembrane’]. (Dyrecta Lab srl activity). Period: from 02-01-2018 to 31-12-2018.
• [P46] Scientific Responsible of the Industry Project: “Engine di Market Basket Analysis e data mining applicato alla business intelligence con integrazione di tecnologie software mobile e Big Data ‘MBA/Data Mining/Big Data Supermarket B.I.’” [Market Basket Analysis Engine and data mining applied to business intelligence with integration of Mobile and Big Data software technologies ‘MBA / Data Mining / Big Data Supermarket B.I.’]. (Dyrecta Lab srl activity). Period: from 02-01-2018 to 28-06-2019.
• [P47] Scientific Responsible of the Industry Project: “Piattaforma integrata intelligente per la gestione delle attività, l’ analytics avanzato, i servizi innovativi, e la predizione intelligente delle attività di manutenzione/ispezione degli autovelox, completa di tecnologie abilitanti Smart Road di intelligenza decisionale, Open Data e Big Data: ‘BETA CONSULTING SMART ROAD PLATFORM’” [Intelligent integrated platform for management of activities, advanced analytics, innovative services, and intelligent prediction of safety speed camera maintenance / inspection activities, having Smart Road enabling technologies for decision making, Open Data and Big Data: "BETA CONSULTING SMART ROAD PLATFORM "].(Dyrecta Lab srl activity). Period: from 06-11-2017 to 05-07-2019.
• [P48] Scientific Responsible of the Industry Project: “Piattaforma B.I. intelligente di management risorse e di monitoraggio costi di assistenza sanitaria ‘Healthcare Assistance Platform’ ” [Management and Resources Allocation’ [B.I. platform oriented on intelligent management of resources and on monitoring health care costs ‘Healthcare Assistance Platform ‘Management and Resources Allocation’]. (Dyrecta Lab srl activity). Period: from 10-07-2017 to 09-07-2018.
• [P49] Scientific Responsible of the Industry Project: “Tracciabilità e Predizione della Produttività vivaio e ottimizzazione delle risorse/materie mediante Data Mining ‘NurseryPlantsDataMiningTraceability’” [Traceability and prediction of nursery productivity and optimization of resources / materials by means Data Mining 'NurseryPlantsDataMiningTraceability']. (Dyrecta Lab srl activity). Period: from 10-07-2017 to 09-07-2020.
• [P50] Scientific Responsible of the Industry Project: “Applicativi per l’ automazione intelligente dello scheduling profilato delle attività, e per lo scoring dei venditori, orientato al trasferimento tecnologico ‘DSS/BI HUMAN RESOURCES’” [Applications for intelligent automation of profiled activity scheduling, and for vendor scoring, oriented to technology transfer 'DSS / BI HUMAN RESOURCES']. (Dyrecta Lab srl activity). Period: from 03-07-2017 to 02-07-2020.
• [P51] Scientific Responsible of the Industry Project: “Piattaforma BigData/B.I. per il volantino dinamico profilato dalla clientela e per il supporto alle decisioni basato su analisi predittive, analisi / utilizzo "social", e su ricerche di mercato in ambito G.D.O. ‘GDO-DSS Dynamic Intelligence’” [BigData / B.I platform. for the dynamic flyer profiled for customers and suitable for decision support based on predictive "social" analysis and on market research in the G.D.O. ‘GDO-DSS Dynamic Intelligence’]. (Dyrecta Lab srl activity). Period: from 03-07-2017 to 28-06-2019.
• [P52] Scientific Responsible of the Industry Project: “Piattaforma di sicurezza integrata per flotte bus orientate al enhancement di visibilità, all'analisi dell'affidabilità del mezzo, al tracking real time e alla dotazione di defibrillatori ‘Security Based Integrated Platform’” [Integrated security platform for bus fleets oriented on enhanced visibility, vehicle reliability, real time tracking and healthcare by defibrillators: "Security Based Integrated Platform"]. (Dyrecta Lab srl activity) Period: from 03-07-2017 to 30-06-2020.
• [P53] Scientific Responsible of the Industry Project: "Gestione predittiva della manutenzione della flotta autobus / bus mediante acquisizione dati da centralina e sistemi integrati di monitoring camera / GPS ‘Bus Predictive Maintenance’” [Predictive management of bus / bus fleet maintenance through data acquisition from control unit and integrated monitoring camera / GPS systems ‘Bus Predictive Maintenance’]. (Dyrecta Lab srl activity). Period: from 03-07-2017 to 30-06-2020.
• [P54] Scientific Responsible of the Industry Project: “Tracciabilità della filiera integrata del pomodoro biologico mediante ingegnerizzazione dei processi produttivi ‘BioTomatoTraceability4.0’” [Traceability of the integrated organic tomato supply chain through the engineering of production processes 'BioTomatoTraceability4.0']. (Dyrecta Lab srl activity) Period: from 02-07-2017 to 02-07-2020.
• [P55] Scientific Responsible of the Industry Project: “Upgrade di produzione mediante del gruppo preparazione prodotti finiti e dell'impianto UHT per preparati per gelati di qualità ‘GelamiUpgrade4.0’” [Production upgrade by engineering of the finished product preparation group and of UHT plant for high quality ice cream preparations 'GelamiUpgrade4.0']. (Dyrecta Lab srl activity) Period: from 13-06-2017 to 12-08-2018.
• [P56] Scientific Responsible of the Industry Project: “Ingegnerizzazione di processo di digitalizzazione / elaborazione dei dati e di procedure di operatività mediante realtà aumentata ‘Socoin System Digitalization / AR Improvements’” [Engineering of digitization / data processing process and of operating procedures bt means augmented reality: "Socoin System Digitalization / AR Improvements"]. (Dyrecta Lab srl activity). Period: from 01-06-2017 to 31-05-2018.
• [P57] Scientific Responsible of the Industry Project: “Innovazione di processo di assemblaggio pneumatici e potenziamento dell’ automatismo controllato con integrazione dell’ image vision per la qualità ‘AUTOMATION AND DIGITAL IMPROVMENTS OF TIRES ASSEMBLY IN INDUSTRY 4.0’ [Innovation of tire assembly process and upgrade of the controlled automation with integration of image vision for quality check ‘AUTOMATION AND DIGITAL IMPROVEMENTS OF TIRES ASSEMBLY IN INDUSTRY 4.0’]. (Dyrecta Lab srl activity). Period: from 02-05-2017 to 01-05-2020 [C68].
• [P58] Scientific Responsible of the Industry Project: “Infrastrutture meccaniche e tecniche di montaggio ed ispezione per l'analisi dell'efficientamento energetico di pannelli applicabili ad edificio ‘ThermalEfficiencyModelPanels ’ ” [Mechanical infrastructures, and assembly and inspection techniques for the analysis of energy efficiency of panels applicable to building ‘ThermalEfficiencyModelPanels’]. (Dyrecta Lab srl activity). Period: from 03-04-2017 to 29-03-2019.
• [P59] Scientific Responsible of the Industry Project: “Modello di innovazione di processo e di upgrade di prodotto di cucine componibili ‘UpgradedKitchens’ ” [Innovation process modeling and product upgrade of modular kitchens ‘UpgradedKitchens’]. (Dyrecta Lab srl activity) Period: from 09-01-2017 to 31-12-2018 [C71].
• [P60] Scientific Responsible of the Industry Project: “Sistema di vendita multicanale integrato ad Engine di Intelligenza Artificale adibito al B.I. ‘MAX A.I.’ ” [Multi-channel sales system integrated with the Engine of Artificial Intelligence used for B.I . ‘MAX A.I.’]. (Dyrecta Lab srl activity). Period: from 02-01-2017 to 31-12-2017 [J90].
• [P61] Scientific Responsible of the Industry Project: “Sistemi di Image processing 2D/3D idonei per la qualità ed il montaggio di schede elettroniche con tecnologia PTH e SMT ‘Image Processing Board Quality- IPBQ’ ”[ 2D / 3D Image Processing Systems suitable for the quality and assembly of electronic boards developed by PTH and SMT technology ‘Image Processing Board Quality – IPBQ’]. (Dyrecta Lab srl activity). Period: from 19-12-2016 to 29-12-2017 [J89].
• [P62] Scientific Responsible of the Industry Project: “Energy Router e Strumenti di Controllo Cloud per Smart Grid ”[Energy Router and Cloud-based control tools for Smart Grids]. (Dyrecta Lab srl activity). Period: from 01-01-2016 to 18-12-2017 [J88].
• [P63] Scientific Responsible of the Industry Project: “Piattaforma di tracciabilità integrata ed engine di data mining, applicata ai freschi con monitoraggio real time degli ambienti controllati in temperatura mediante termografia ad infrarossi ed orientata all'ottimizzazione delle scorte / prezzi ed al controllo energetico ottimale degli ambienti: ‘Traceability/IR Thermography Fresh Food’ ” [Integrated traceability platform and data mining engine applied to the fresh food, with real time temperature monitoring of the controlled environments by infrared thermography, and oriented to the optimization of the stocks / prices and to the optimal energy control of the environments] (Dyrecta Lab srl activity). Period: from 02-01-2018 to 28-06-2019.
• [P64] Scientific Responsible of the Industry Project: “Engine di market basket analysis e data mining applicato alla business intelligence con integrazione di tecnologie software mobile e big data: ‘MBA/Data Mining/Big Data Supermarket BI’ ” [Market basket analysis and data mining engine applied to business intelligence with integration of mobile and big data software technologies] (Dyrecta Lab srl activity). Period: from 02-01-2018 to 28-06-2019.
• [P65] Scientific Responsible of the Industry Project: “Sistema di supporto alle decisioni orientato alla business intelligence e all' incremento dello stock di conoscenza mediante l'elaborazione di dati del sistema informativo aziendale con algoritmi strutturati di intelligenza artificiale: ‘FORKUP DSS’” [Decision support system oriented to the business intelligence and to the increase of the stock of knowledge through the data processing of the information system by means structured algorithms of artificial intelligence] (Dyrecta Lab srl activity). Period: from 05-02-2018 to 31-12-2020.
• [P66] Scientific Responsible of the Industry Project: “Sistema di supporto alle decisioni orientato alle attività di marketing correlati alla progettazione intelligente e innovativa delle piazze “SQUARE IMUE” [Decision support system oriented for marketing activities related to intelligent and innovative design of squares] (Dyrecta Lab srl activity). Period: from 02-07-2018 to 31-12-2019.
• [P67] Scientific Responsible of the Industry Project: “Linea di produzione prototipale di serbatoi con digitalizzazione dell' informazione ed upgrade della produzione mediante intelligenza artificiale: ‘TankProductionAI’”[Prototype production line of tanks with digitalization of the production and upgrade of production by artificial intelligence] (Dyrecta Lab srl activity). Period: from 03-09-2018 to 31-12-2019 [C62].
• [P68] Scientific Responsible of the Industry Project: “Sviluppo della base di conoscenza mediante algoritmi di intelligenza artificiale progettati per l'ottimizzazione della logistica e dei trasporti: ‘AI LOGISTIC’” [Development of the knowledge base using artificial intelligence algorithms designed to optimize logistics and transport] (Dyrecta Lab srl activity). Period: from 03-09-2018 to 28-02-2020.
• [P69] Scientific Responsible of the Industry Project: “Controllo ed ottimizzazione dei processi di trasformazione del grano mediante upgrade del sistema informativo/digitale ed avanzamento tecnologico innovativo "Casillo Technology Production - CaTePro-"(Dyrecta Lab srl activity). Period: from 01-10-2018 to 31-12-2019.
• [P70] Scientific Responsible of the Industry Project: “Modelli di data mining di consulenza finanziaria robotizzata: ‘ROBOTIC FINANCIAL CONSULTING’”[Data mining models of robotic financial consulting: ‘ROBOTIC FINANCIAL CONSULTING’] (Dyrecta Lab srl activity). Period: from 05/11/2018 to 31/12/2019.
• [P71] Scientific Responsible of the Industry Project: “Motore dinamico per il calcolo automatico degli skill e delle kpi con integrazione dell'intelligenza artificiale a supporto dell'analisi incrociata domanda / offerta e della profilazione ottimale dei lavoratori: ‘YESWENET AI’”[Dynamic engine for the automatic calculation of skills and kpi with integration of artificial intelligence to support cross-demand / supply analysis and optimal worker profiling: ‘YESWENET AI’] (Dyrecta Lab srl activity). Period: from 03/09/2018 to 28/02/2020.
• [P72] Scientific Responsible of the Industry Project: “Engine di automazione di estrazione dati e machine learning per l'ottimizzazione dinamica delle scorte e dei prezzi dei pneumatici: ‘AUTOMATIC ENGINE DECISION SUPPORT SYSTEM – DSS’” [Engine for data extraction automation and machine learning oriented on dynamic optimization of stocks and tire prices: ‘AUTOMATIC ENGINE DECISION SUPPORT SYSTEM - DSS’] (Dyrecta Lab srl activity). Period: from 03/09/2018 to 31/08/2020.
• [P73] Scientific Responsible of the Industry Project: “Algoritmi di intelligenza artificiale applicati alla cybersecurity e alla sicurezza dei server ‘AI SERVER CYBER SECURITY’ [Artificial intelligence algorithms applied to cybersecurity and server security ‘AI SERVER CYBER SECURITY’] (Dyrecta Lab srl activity). Period: from 01/07/2019 to 31/07/2020.
• [P74] Scientific Responsible of the Industry Project: “Sistema esperto con motore inferenziale interconnesso ad engine di intelligenza artificiale applicati alla sicurezza dei dati contenuti in database multi-accesso ‘INFERENCE/AI ENGINE CIA -DB CYBERSECURITY’ [Expert system based on inferential engine interconnected to engines of artificial intelligence applied to the safety of data collected into multi-access database: ‘INFERENCE / AI ENGINE CIA -DB CYBERSECURITY’] (Dyrecta Lab srl activity). Period: from 06/05/2019 to 31/12/2020.
• [P75] Scientific Responsible of the Industry Project: “Sistema integrato prototipale basato su meccatronica ed intelligenza artificiale applicato al cutting ‘MECHATRONIC CUT AI - MECUTAI’ [Integrated prototype system based on mechatronics and artificial intelligence applied to cutting machines ‘MECHATRONIC CUT AI - MECUTAI’] (Dyrecta Lab srl activity). Period: from 03/07/2019 to 30/12/2020.
• [P76] Scientific Responsible of the Industry Project: “Digital transformation of a prototype cross platform oriented on cybersecurity, virtual connectivity, big data and artificial intelligence control: “SECURE VIRTUAL AI DISTRIBUTION NETWORKING" (Dyrecta Lab srl activity). Period: from 04/02/2019 to 31/12/2019.
• [P77] Scientific Responsible of the Industry Project: “Studio scientifico del trattamento ottimizzato al plasma di superfici di tessuti in pelle e di materiali plastici particolari orientato all'ancoraggio degli inchiostri di stampa ‘PLASMA PRE-PRINT TREATMENT’ [Scientific study of plasma optimized on treatment of skin fabric surfaces and of special plastic materials for the anchoring of printing inks ‘PLASMA PRE-PRINT TREATMENT’] (Dyrecta Lab srl activity). Period: from 14/01/2019 to 31/12/2020.
• [P78] Scientific Responsible of the Industry Project: “Definizione e realizzazione di un sistema di supporto alle attività di facing dei prodotti nel campo della GDO mediante l'utilizzo di tecnologie software/hardware basate su intelligenza artificiale e realtà aumentata: ‘FACING AI’ [Definition and realization of a system to support facing activities of products in the GDO field by using software / hardware technologies based on artificial intelligence and augmented reality ‘FACING AI’] (Dyrecta Lab srl activity). Period: from 07/01/2019 to 31/12/2019.
• [P79] Scientific Responsible of the Industry Project: “Nuove metodologie per la riduzione di prodotti chimici nella sanificazione/lavorazione degli ortaggi pre-tagliati pronti al consumo ‘MESLO’[New methodologies for the reduction of chemicals in the sanitation / processing of pre-cut vegetables ready for consumption "MESLO"] (Dyrecta Lab srl activity. Period: from 04/01/2019 to 31/12/2020.
• [P80] Dyrecta Lab Scientific Responsible of the Project: “Un innovativo modello sanitario di presa in carico della cronicità sul territorio pugliese ‘Più sicuri’ [An innovative sanitary model chronicity assistance in the Apulian territory ‘Più Sicuri’] Bando INNOLABS (Intervento cofinanziato nell’ ambito del POR Puglia FESR-FSE 2014-2020- Asse prioritario 1 – Ricerca, sviluppo tecnologico, Innovazione Azione 1.4 b Sostegno Alla Creazione Di Soluzioni Innovative Finalizzate A Specifici Problemi Di Rilevanza Sociale -). Period: from 29/01/2019 to 29/07/2020.
• [P81] Dyrecta Lab Scientific Responsible of the Project: “Piattaforma di identificazione di nuovi marcatori prognostici nei pazienti con gammapatia monoclonale e di criteri di stratificazione terapeutica personalizzata ‘TeleMieloLab’” [Identification platform for new prognostic markers in patients with monoclonal gammopathy performing personalized therapeutic stratification criteria ‘TeleMieloLab’] Bando INNOLABS (Intervento cofinanziato nell’ ambito del POR Puglia FESR-FSE 2014-2020- Asse prioritario 1 – Ricerca, sviluppo tecnologico, Innovazione Azione 1.4 b Sostegno Alla Creazione Di Soluzioni Innovative Finalizzate A Specifici Problemi Di Rilevanza Sociale -). Period: from 02/01/2019 to 30/06/2020.
• [P82] Dyrecta Lab Scientific Responsible of the Project: “Piattaforma tecnologica di monitoraggio real time e di supporto alle decisioni orientata all’ efficienza idrica, a irischi idrogeologici e alla qualità dll’ acqua del territorio Pugliese ‘HydroRisk Lab’” Bando INNOLABS (Intervento cofinanziato nell’ ambito del POR Puglia FESR-FSE 2014-2020- Asse prioritario 1 – Ricerca, sviluppo tecnologico, Innovazione Azione 1.4 b Sostegno Alla Creazione Di Soluzioni Innovative Finalizzate A Specifici Problemi Di Rilevanza Sociale -). Period: from 02/01/2019 to 30/06/2020.
• [P83] Dyrecta Lab Scientific Responsible of the Project: “Ottimizzazione dei processi di produzione mediante algoritmi innovativi applicati ai dati macchina e image processing con orientamento alla predictive maintainance e alla ottimizzazione della qualità "GEA QUALITY IMPROVEMENT" [Production processes optimization through innovative algorithms applied to machine data, and image processing oriented on predictive maintainance and quality optimization]. Period: from 02/07/2018 to 31/12/2019.

Statistics

This profile has been visited
0
times
Note: The data is updated daily.

Contact Details

Address: Via Vescovo Simplicio 45 , 70014, Conversano (BA), Italy
Email: visible to members only
© 2016 American Nano Society. All rights reserved.